Tag: electronics

PIAA Light Installation in a Z06

Here’s how to install PIAA fog lights on a Z06 using OEM hardware. This tip should also work on a FRC as well. Parts list: 2- bolts part # 11514623 2- nuts part# 10281487 1- switch part# 12135155 1- lt fog lamp part# 10438855 1- rt fog lamp part# 10438856 You may want to fabricate […] More »

  Comments | By - April 21, 2010

PKE How To Program Transmitter

1. Place transmitter and any optional transmitter 10 feet or more away from the car. 2. Turn the ignition key to the ON position. 3. Push the TRIP/ODO button on the DIC twice. 4. Within 5 Seconds, push and hold the FUEL/INFO button on the DIC until the PKE light on the DIC comes on […] More »

  Comments | By - April 21, 2010

Popping Buzzing Bose System Even When the Radio is Off

You will benefit from this tech tip if: 1. Your Bose system does a loud �POP� when you power it off, or � 2. Your Bose system continues to �BUZZ� even when you power it off, or� 3. Your Bose system �BUZZ� now becomes a loud and constant �HISS� even when the system is powered […] More »

  Comments | By - April 21, 2010

Remote Mount Solenoid Installation Instructions

Before beginning familiarize yourself with any wiring diagrams of your starter circuit that you may have. On the existing solenoid (mounted to the starter) there are typically three (3) terminals. Depending on the year of your vehicle, either all or only two (2) will be used. Typically, non-HEI equipped vehicles will use all three terminals, […] More »

  Comments | By - April 21, 2010

Running Wires Though Driver Side Firewall

I thought this might be helpful for those installing boost and/or fuel gauges. When I first started looking I was wondering how the heck I would get the wires run. Hope this helps. Tod Step 1: Safely jack up car and remove drivers side wheel. Step 2: Remove fenderwell cover. Step 3: Remove dead peddle […] More »

  Comments | By - April 21, 2010

  1. 1
  2. 2
  3. 3
  4. 4