Diablo sport intune
#1
Diablo sport intune
I'm having my engine Replaced from engine failure over warranty it's a . 2014 c7 And I don't think my tuner will work any longer if I have to have th engine replaced might have to get a new tuner but does the engine still consider a 2014 or is it a 2015 mode engine when I order the tuner
#2
Drifting
It should work on your new motor unless dealer changes pcm, loads a different oem tune file,making the tuner think its used in a different vin car. I would shoot Mike or Diablo s tech support an email if it does not work with new motor and they will help you out....you did did restore oem tune before bringing car in for motor change?
#3
Le Mans Master
No reason to get a new handheld, it's tied to the ECU, not engine. Worst case, Diablo will get it unlocked for you if for some reason the dealer reset or replaced your ECU. The same handheld can be used regardless of 2014 or 2015.
#4
Supporting Vendor
Ideally just restore the stock tune to the vehicle before they service it then when you get it back it will simply let you load the new tunes
Thanks
Thanks
#6
Burning Brakes
I'm having my engine Replaced from engine failure over warranty it's a . 2014 c7 And I don't think my tuner will work any longer if I have to have th engine replaced might have to get a new tuner but does the engine still consider a 2014 or is it a 2015 mode engine when I order the tuner
#7
3 Cylinders Failure went out and had them replaced then 2 weeks later took it back in hearing a noise in the gear box they told me it was a bad torque tube and found metal in the oil filter and they told me I have 2 options . Either rebuild it or replace they Recommended be to replace it and I thought it was a better way to go
Last edited by Seannyc; 07-18-2015 at 09:14 AM.
#8
I had it tuned back to factory soon as the problem occurd so do I call Diablo or email them for the reset on the tuner
#9
It should work on your new motor unless dealer changes pcm, loads a different oem tune file,making the tuner think its used in a different vin car. I would shoot Mike or Diablo s tech support an email if it does not work with new motor and they will help you out....you did did restore oem tune before bringing car in for motor change?
#10
Drifting
Diablo sport intune
That's all that's required. After dealer replaces motor it will connect to pcm and load tune with no problem. When you restore factory tune,the in tune has 1 license back on it to tune another vehicle. good luck with the new motor!
#11
#12
Melting Slicks
#13
Burning Brakes
#14
#15
#16
Burning Brakes
I'd love to reduce the AFM on mine, but not looking for anything else so a dyno tune I don't think is necessary. The Range device and Diablo are what I'm looking at right now.
#17
Melting Slicks
Member Since: Oct 2010
Location: Fair Oaks, California
Posts: 2,162
Received 335 Likes
on
243 Posts
2017 C7 of the Year Finalist
$150.00 916-967-8787, Leave voice message, will call or text you back by cellular. http://www.rangetechnology.com/pages/vehicles
#18
I'm having my engine Replaced from engine failure over warranty it's a . 2014 c7 And I don't think my tuner will work any longer if I have to have th engine replaced might have to get a new tuner but does the engine still consider a 2014 or is it a 2015 mode engine when I order the tuner
jk. lol. ; )
#19
#20
I have a Range I will sell if you are interested. I used it on my 2014 Camaro SS as the AFM was horrific. I do not feel AFM on my Z06.
$150.00 916-967-8787, Leave voice message, will call or text you back by cellular. http://www.rangetechnology.com/pages/vehicles
$150.00 916-967-8787, Leave voice message, will call or text you back by cellular. http://www.rangetechnology.com/pages/vehicles