This is tempting
Thread Starter
Melting Slicks
Joined: Jan 2002
Posts: 2,682
Likes: 0
From: Atlanta GA
This is tempting
Single din center channel speaker:
http://www.crutchfield.com/S-fX76cSv...p?i=500SBS05DC
Although I'm not running moblie video, I could run this from the speaker level outputs from my HU for better imaging. It would also fill in the pocket under the HU in the C6 since its a true double din opening.
For the price, its worth giving it a try. Any thoughts?
http://www.crutchfield.com/S-fX76cSv...p?i=500SBS05DC
Although I'm not running moblie video, I could run this from the speaker level outputs from my HU for better imaging. It would also fill in the pocket under the HU in the C6 since its a true double din opening.
For the price, its worth giving it a try. Any thoughts?
Le Mans Master
Joined: May 2003
Posts: 5,362
Likes: 3
From: Delray Beach FL
Sweet!
One company had a 1/2 DIN sized center channel. It was either JL Audio or JBL. Saw it in the Car Stereo Cookbook. I've been thinking about something that size with a 1 DIN deck. No need to file anything down then.
One company had a 1/2 DIN sized center channel. It was either JL Audio or JBL. Saw it in the Car Stereo Cookbook. I've been thinking about something that size with a 1 DIN deck. No need to file anything down then.
Thread Starter
Melting Slicks
Joined: Jan 2002
Posts: 2,682
Likes: 0
From: Atlanta GA
I think I'll pick one up and give it a try. I'm running front comps from an amp and no rears at all. If i hook up the rear speaker level outputs from the HU to this speaker, I can "fade" in how much center channel I want. 
Race Director
Joined: Feb 2005
Posts: 12,458
Likes: 27
Check if it has 1 speaker wire or 2. If it only has 1, you'll need a HU with a center channel or you'll only be able to send a left or right channel to it.
Maybe HU speaker wires can be bridged to form a mono channel? I don't remember if that can be done or not.
Maybe HU speaker wires can be bridged to form a mono channel? I don't remember if that can be done or not.
Thread Starter
Melting Slicks
Joined: Jan 2002
Posts: 2,682
Likes: 0
From: Atlanta GA
Originally Posted by 65 Hardnoks
Check if it has 1 speaker wire or 2. If it only has 1, you'll need a HU with a center channel or you'll only be able to send a left or right channel to it.
Maybe HU speaker wires can be bridged to form a mono channel? I don't remember if that can be done or not.
Maybe HU speaker wires can be bridged to form a mono channel? I don't remember if that can be done or not.
I don't think you can bridge the speaker level outputs together w/out risk of damaging the chip.
Race Director
Joined: May 2003
Posts: 14,137
Likes: 2,985
From: Iowa
St. Jude Donor '03 thru '26
do not try to bridge a HU 
Clarion made a center channel like this, had like five 1/2" drivers
In a "true" 5.1 set-up, all 5 main speakers should be the same. We all know that seldom happens. I say go for it, let us know the results
Clarion made a center channel like this, had like five 1/2" drivers
In a "true" 5.1 set-up, all 5 main speakers should be the same. We all know that seldom happens. I say go for it, let us know the results
Melting Slicks
Joined: Sep 2003
Posts: 3,306
Likes: 2
From: Wesley Chapel Fl
A center channel speaker can and often does have a negative effect on the system. The problem is there is no information recorded on a CD for the center speaker...a DVD does have information for center. The CD has information for left or right and what will happen is information that is intended for one side will be sent to the center speaker. Often a recording artist will have information only on the left side...let's say a guitar solo...that will not sound correct because it will also be coming out of the center speaker.
Years ago every competion car had a center channel. But as we learned what proper staging is and proper speaker placement the center channels were removed. Now they are coming back because of 5.1 and mobile video.
Years ago every competion car had a center channel. But as we learned what proper staging is and proper speaker placement the center channels were removed. Now they are coming back because of 5.1 and mobile video.
Thread Starter
Melting Slicks
Joined: Jan 2002
Posts: 2,682
Likes: 0
From: Atlanta GA
Randy, I hear you. According to the tech guys at crutchfield, this speaker does have two inputs. I couldn't find any information on Alpine's website. I'm assuming they made the wiring flexible for either HU or mono amp installations. The "woofers" cant be more than 3" apart, with the tweet in the center.
I'm hoping to lift the stage more than center it. Plus it will get rid of the stupid pocket in the dash. I'm going to mount the speaker over the HU and run it from the rear speaker level outputs (in stereo). I'll have the ability to independently set the HPF and use the fader control to dial in how much center I want. That combined with the time correction, should net an interesting result.
I'll take pics of the progress. The speaker will be here tomorrow, and I just ordered a double din install kit.
I'm hoping to lift the stage more than center it. Plus it will get rid of the stupid pocket in the dash. I'm going to mount the speaker over the HU and run it from the rear speaker level outputs (in stereo). I'll have the ability to independently set the HPF and use the fader control to dial in how much center I want. That combined with the time correction, should net an interesting result.
I'll take pics of the progress. The speaker will be here tomorrow, and I just ordered a double din install kit.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
5 Best & 5 Worst Corvette Daily Drivers
Joe Kucinski
The Headlights of Every Corvette Generation Explained
Joe Kucinski
5 Best & 5 Most Overrated Corvette Track Packages of All Time!
Joe Kucinski
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
Race Director
Joined: Feb 2005
Posts: 12,458
Likes: 27
Originally Posted by leolufse
Randy, I hear you. According to the tech guys at crutchfield, this speaker does have two inputs. I couldn't find any information on Alpine's website. I'm assuming they made the wiring flexible for either HU or mono amp installations. The "woofers" cant be more than 3" apart, with the tweet in the center.
I'm hoping to lift the stage more than center it. Plus it will get rid of the stupid pocket in the dash. I'm going to mount the speaker over the HU and run it from the rear speaker level outputs (in stereo). I'll have the ability to independently set the HPF and use the fader control to dial in how much center I want. That combined with the time correction, should net an interesting result.
I'll take pics of the progress. The speaker will be here tomorrow, and I just ordered a double din install kit.
I'm hoping to lift the stage more than center it. Plus it will get rid of the stupid pocket in the dash. I'm going to mount the speaker over the HU and run it from the rear speaker level outputs (in stereo). I'll have the ability to independently set the HPF and use the fader control to dial in how much center I want. That combined with the time correction, should net an interesting result.
I'll take pics of the progress. The speaker will be here tomorrow, and I just ordered a double din install kit.
I would call Crutchfield back and ask if it could be returned if it dosen't measure up to expectations.
Also, you will probably need some inline bass blockers (they might have them already installed) since those 2" woofers won't be able to put out squat for bass and will sound incredibly harsh without that blocked signal.
Good luck
Last edited by 65 Hardnoks; Jun 23, 2005 at 01:07 PM.
