Ready for install
Thread Starter
Burning Brakes
Joined: Jan 2003
Posts: 1,207
Likes: 27
From: Sun Diego CA
Ready for install
I have everything ready for Sub install Saturday.
Infinity Kappa Perfect 10.1D.
MTX Thunder Pro3002, will run one channel (300W into 2 ohms @ 12.6V)
Subthump box for 10", measured out to .8cu/ft, so that's close enough to the .6 Infinity recommends with 1" insulation.
Got all the wire and RCA's, plus the Bose interface that provides the rca outs.
Gonna silicon a piece of wood up to the back of the trunk to mount the amp.
Also have a set of the Alpine 080's to replace the twiddlers in the doors.
Gonna be fun...
Infinity Kappa Perfect 10.1D.
MTX Thunder Pro3002, will run one channel (300W into 2 ohms @ 12.6V)
Subthump box for 10", measured out to .8cu/ft, so that's close enough to the .6 Infinity recommends with 1" insulation.
Got all the wire and RCA's, plus the Bose interface that provides the rca outs.
Gonna silicon a piece of wood up to the back of the trunk to mount the amp.
Also have a set of the Alpine 080's to replace the twiddlers in the doors.
Gonna be fun...
