What do you run in your system?
#141
Pro
Year: 2003
Model: Z06
Just ordered the following:
Head unit: Kenwood Excelon KDC-X794
Other: Pac Audio ROEM-VET1, GM Antenna adapter, Blank faceplate
Cost: $240
want to eventually replace the speakers but i will get there in time. For now i just REALLY want ipod integration and given the radio was almost the same price as the Pac unit it made no sense to invest in the stock HU.
Model: Z06
Just ordered the following:
Head unit: Kenwood Excelon KDC-X794
Other: Pac Audio ROEM-VET1, GM Antenna adapter, Blank faceplate
Cost: $240
want to eventually replace the speakers but i will get there in time. For now i just REALLY want ipod integration and given the radio was almost the same price as the Pac unit it made no sense to invest in the stock HU.
Last edited by MR Turco; 07-29-2010 at 01:32 PM.
#142
Year: 1998
Model: Coupe
Head Unit: Sony CDX - GT540
Front Speakers: Polk Audio 6X9 db691
Rear Speakers: Alpine SPS 600 6 1/2
Sub: Pioneer TS- SW 12"
Box: Stealth rear location
Sound deadning: Dynamat
Sysrem Cost: 1350.00
Install Cost 250.00
Model: Coupe
Head Unit: Sony CDX - GT540
Front Speakers: Polk Audio 6X9 db691
Rear Speakers: Alpine SPS 600 6 1/2
Sub: Pioneer TS- SW 12"
Box: Stealth rear location
Sound deadning: Dynamat
Sysrem Cost: 1350.00
Install Cost 250.00
#143
Intermediate
Member Since: Jun 2008
Location: Cut-n-Shoot Texas
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
And the list goes on
Year: 1995
Model: base
Head Unit: DEX-P99RS
Processor: head unit
Front Speakers: 2 Scan Speak 18W8545K woofers and a 9900 tweeter on each side
Rear Speakers: N/A
Sub (s): Exodus Audio Shiva X2
Amplifier (s): 2 Alpine PDX 2.150 and a PDX 1.1000
Car PC: none
Sound deadening: Second Skin Corvette Pack
Wires: Monster Cable 1/0,4 and 16 guage wires
Other:
Box: Home Made
System Cost: $5500
Install Cost: $200 so far
Ive spent way too much on this
Year: 1995
Model: base
Head Unit: DEX-P99RS
Processor: head unit
Front Speakers: 2 Scan Speak 18W8545K woofers and a 9900 tweeter on each side
Rear Speakers: N/A
Sub (s): Exodus Audio Shiva X2
Amplifier (s): 2 Alpine PDX 2.150 and a PDX 1.1000
Car PC: none
Sound deadening: Second Skin Corvette Pack
Wires: Monster Cable 1/0,4 and 16 guage wires
Other:
Box: Home Made
System Cost: $5500
Install Cost: $200 so far
Ive spent way too much on this
#144
Tech Contributor
Update from post #135 (I just can't stop)
Year: 2007
Model: Coupe
Head Unit: Pioneer AVIC-x920BT
Processor:
Front Speakers: CDT CL-E61CF Components
Rear Speakers: Cadence CVL5K 5.25" Mid-Drivers w/FMod 3500Hz Low Pass Filter at the amp
Sub: Pioneer TS-SW1201S4 (12" Shallow)
Amplifier: Kenwood eXcelon XR-5S (5 Channel Class D)
Car PC:
Sound deadening: BXT II & P/S Ensolite everywhere, just a bit of Frost King in the trunk
Wires: Monster for front channels, coat hangers for the rest
Other: 60gig Video iPod, C2R-GM24, PAC SWI-PS, SIR-PNR2, 30amp noise filter, ground loop isolators, MadVette door mounting plates, LP-1CA Backup Camera, F-Mod 3500Hz low pass filters for the rears
Box: DIY (pics coming soon)
System Cost: $1800 overall
Install Cost: Labor Day Weekend
Model: Coupe
Head Unit: Pioneer AVIC-x920BT
Processor:
Front Speakers: CDT CL-E61CF Components
Rear Speakers: Cadence CVL5K 5.25" Mid-Drivers w/FMod 3500Hz Low Pass Filter at the amp
Sub: Pioneer TS-SW1201S4 (12" Shallow)
Amplifier: Kenwood eXcelon XR-5S (5 Channel Class D)
Car PC:
Sound deadening: BXT II & P/S Ensolite everywhere, just a bit of Frost King in the trunk
Wires: Monster for front channels, coat hangers for the rest
Other: 60gig Video iPod, C2R-GM24, PAC SWI-PS, SIR-PNR2, 30amp noise filter, ground loop isolators, MadVette door mounting plates, LP-1CA Backup Camera, F-Mod 3500Hz low pass filters for the rears
Box: DIY (pics coming soon)
System Cost: $1800 overall
Install Cost: Labor Day Weekend
Last edited by markcz; 09-25-2010 at 06:14 AM.
#145
Instructor
Member Since: Jun 2010
Location: Both Coasts
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2008
Model: Coupe
Head Unit: Pioneer Avic Z120BT w/usb & ipod cables, and rear view camera
Processor: JBL MS8 w/receiver installed in glove box (RF, not IR, so works with door closed)
Front Stage: Seas Lotus Reference 8" midbass (doors) & RT27F tweeters (A-pillars)
Rear speakers: stock
Amps: Two Exile Audio Xi 800.4's
Subwoofer: Cerwin Vega Smax12 ultra thin 12" subwoofer (to retain cargo space and rear roof storage)
Sound deadening: not sure of the material/brand - ask Bing! But I can tell you that the doors feel and close very thick and solid, like mercedes doors. Can't hear a peep outside.
Wires: ask Bing
Box: custom by Bing
System Cost: more than I want to admit :-D
Install Cost: worth every penny
I'm just now breaking the system in (installed by Bing from SimplicityinSound).
Basically...... it rocks!
One note, there is raised CORVETTE lettering on the front of the box in the back, it's just not showing in the pics here.
Here are links to the rest of the pix and description of the install (from start to finish) from Bing:
http://www.diymobileaudio.com/forum/...a-pioneer.html
Model: Coupe
Head Unit: Pioneer Avic Z120BT w/usb & ipod cables, and rear view camera
Processor: JBL MS8 w/receiver installed in glove box (RF, not IR, so works with door closed)
Front Stage: Seas Lotus Reference 8" midbass (doors) & RT27F tweeters (A-pillars)
Rear speakers: stock
Amps: Two Exile Audio Xi 800.4's
Subwoofer: Cerwin Vega Smax12 ultra thin 12" subwoofer (to retain cargo space and rear roof storage)
Sound deadening: not sure of the material/brand - ask Bing! But I can tell you that the doors feel and close very thick and solid, like mercedes doors. Can't hear a peep outside.
Wires: ask Bing
Box: custom by Bing
System Cost: more than I want to admit :-D
Install Cost: worth every penny
I'm just now breaking the system in (installed by Bing from SimplicityinSound).
Basically...... it rocks!
One note, there is raised CORVETTE lettering on the front of the box in the back, it's just not showing in the pics here.
Here are links to the rest of the pix and description of the install (from start to finish) from Bing:
http://www.diymobileaudio.com/forum/...a-pioneer.html
Last edited by CaliSun; 09-21-2010 at 02:00 PM.
#146
Racer
Member Since: Dec 2009
Location: Mandeville LA
Posts: 291
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2009
Model: AO Z06 3LZ
Head Unit: Pioneer AVIC-Z110BT
Processor: n/a
Front Speakers: Image Dynamics XS65 (RAAMaudio custom mount bracket for tweeters)
Rear Speakers: n/a
Sub (s): Image Dynamics IDQ10 V3 D4 (wired for 2ohm)
Amplifier (s): Arc KS Mini 125.4 & Arc KS Mini 500.1 (both fit perfectly where the Bose AMP was mounted in the foot well), RAAMaudio custom bracket to hold amps
Car PC: n/a
Sound deadening: RAAMaudio; BTX II RAAMmat, PS ensolite, speaker baffles, door filler plates, aluminum door channels
Wires: Stinger; wires, fuses, interconnects, & misc.
Other: PAC; OS2 OnStar & RAP interface, CM1 chime module, SWI-PSv1 steering wheel controls
Metra; 40-GM10 antenna adapter, 95-3304 Radio dash kit
Box: 4080 Enclosures (customized for IDQ sub)
System Cost: $3000
Install Cost: blood, sweat and tears
Model: AO Z06 3LZ
Head Unit: Pioneer AVIC-Z110BT
Processor: n/a
Front Speakers: Image Dynamics XS65 (RAAMaudio custom mount bracket for tweeters)
Rear Speakers: n/a
Sub (s): Image Dynamics IDQ10 V3 D4 (wired for 2ohm)
Amplifier (s): Arc KS Mini 125.4 & Arc KS Mini 500.1 (both fit perfectly where the Bose AMP was mounted in the foot well), RAAMaudio custom bracket to hold amps
Car PC: n/a
Sound deadening: RAAMaudio; BTX II RAAMmat, PS ensolite, speaker baffles, door filler plates, aluminum door channels
Wires: Stinger; wires, fuses, interconnects, & misc.
Other: PAC; OS2 OnStar & RAP interface, CM1 chime module, SWI-PSv1 steering wheel controls
Metra; 40-GM10 antenna adapter, 95-3304 Radio dash kit
Box: 4080 Enclosures (customized for IDQ sub)
System Cost: $3000
Install Cost: blood, sweat and tears
Last edited by johnnywoz; 11-25-2010 at 11:08 AM.
#147
Instructor
Member Since: Mar 2010
Location: Chicago Illinois
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
Do all your OEM controls still function, like Blue-tooth from teh steering wheel, all otehr ?
What doesn't work - HUD w/ nav ?
I'm about to re-think the whole stereo / nav revamp on my 2010 and don't really want to go back-wards on features I alreay have.
What doesn't work - HUD w/ nav ?
I'm about to re-think the whole stereo / nav revamp on my 2010 and don't really want to go back-wards on features I alreay have.
#148
Tech Contributor
If you buy the right interface adapters you don't loose much.
Steering wheel buttons can be used if you get a HU that can use an adapter, but bluetooth buttons become more radio control buttons, they can't be used for BT.
HUD integration is lost, but you won't miss it if you get a HU with a sexy voice
#149
Racer
Member Since: Jul 2009
Location: South Bend IN
Posts: 300
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Convertible
Head Unit: Pioneer DEH-P700BT
Processor:
Front Speakers: JL 650 C5
Rear Speakers:
Sub (s): JL 10 3w3
Amplifier (s): JL 250/1, JL 300/4
Car PC:
Sound deadening:
Wires: Tsunami
Other:
Box: JL Stealthbox
System Cost: $260 Shipped...thanks ebay.
Install Cost:
Model: Convertible
Head Unit: Pioneer DEH-P700BT
Processor:
Front Speakers: JL 650 C5
Rear Speakers:
Sub (s): JL 10 3w3
Amplifier (s): JL 250/1, JL 300/4
Car PC:
Sound deadening:
Wires: Tsunami
Other:
Box: JL Stealthbox
System Cost: $260 Shipped...thanks ebay.
Install Cost:
#150
Year: 2007
Model: coupe
Head Unit: Pioneer AVH 3300 BT
Processor: none
Front Speakers: Polk Audio Mobile Monitor 6501 components
Rear Speakers: Polk Audio Mobile Monitor 521 co-ax
Sub (s): 2x Kenwood eXcelon KFC-XW1000F
Amplifier (s): Polk Audio PA1100.5
Car PC: none
Sound deadening: none
Wires: Kicker ZCK44
Other:
Box: http://shop.doubledmods.com/C6-Corve...c6coupebox.htm
System Cost: $1380
Install Cost: $700
and yes the roof still fits over those sub grill bars =D
Model: coupe
Head Unit: Pioneer AVH 3300 BT
Processor: none
Front Speakers: Polk Audio Mobile Monitor 6501 components
Rear Speakers: Polk Audio Mobile Monitor 521 co-ax
Sub (s): 2x Kenwood eXcelon KFC-XW1000F
Amplifier (s): Polk Audio PA1100.5
Car PC: none
Sound deadening: none
Wires: Kicker ZCK44
Other:
Box: http://shop.doubledmods.com/C6-Corve...c6coupebox.htm
System Cost: $1380
Install Cost: $700
and yes the roof still fits over those sub grill bars =D
#151
Drifting
Member Since: Jun 2006
Location: Chicago Illinois
Posts: 1,294
Likes: 0
Received 17 Likes
on
16 Posts
St. Jude Donor '12
Year: 2010
Model: Corvette coupe
Head Unit: kenwood dnn991hd
Processor: none
Front Speakers: polk audio mm6501
Rear Speakers: polk audio mm521
Sub (s): Arc Audio 10D4
Amplifier (s): arc audio ks 125.4 mini and ks 5001 mini in passenger footwell w/ RAAMaudio custom bracket
Car PC: none
Sound deadening: Raam Audio, 1 pack BXT II and 3 yards of ensolite (enough for doors, hatch, and parts of floor and wall behind seats) Madvette Motorsports heat insulation
Wires: stinger, 4 gauge power and ground, 8 gauge from distribution block to each amp, 14 gauge to sub, crossover and mids, and 16 gauge to tweeter, stinger HPM 3 series interconnects
Other: nakidparts speaker baffles, RAAMaudio alumalite door filler plate and aluminum channels in doors
Box: Raam Audio fiberglass box
System Cost: not calculated, but worth every penny
Install Cost: blood, sweet, tears and curses
Details concerning my install can be found here: DIY stealth C6 coupe audio upgrade [pics]
Model: Corvette coupe
Head Unit: kenwood dnn991hd
Processor: none
Front Speakers: polk audio mm6501
Rear Speakers: polk audio mm521
Sub (s): Arc Audio 10D4
Amplifier (s): arc audio ks 125.4 mini and ks 5001 mini in passenger footwell w/ RAAMaudio custom bracket
Car PC: none
Sound deadening: Raam Audio, 1 pack BXT II and 3 yards of ensolite (enough for doors, hatch, and parts of floor and wall behind seats) Madvette Motorsports heat insulation
Wires: stinger, 4 gauge power and ground, 8 gauge from distribution block to each amp, 14 gauge to sub, crossover and mids, and 16 gauge to tweeter, stinger HPM 3 series interconnects
Other: nakidparts speaker baffles, RAAMaudio alumalite door filler plate and aluminum channels in doors
Box: Raam Audio fiberglass box
System Cost: not calculated, but worth every penny
Install Cost: blood, sweet, tears and curses
Details concerning my install can be found here: DIY stealth C6 coupe audio upgrade [pics]
Last edited by kedar; 10-17-2014 at 01:16 PM. Reason: add detail
#152
Advanced
Member Since: Mar 2009
Location: Indianapolis IN
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2010
Model: Grand Sport
Head Unit: Pioneer AVIC
Processor:
Front Speakers: polk audio mm6501
Rear Speakers: stock fill
Sub: Polk Audio MM1202, fiberglas encloser and leather wrapped to match interior.
Amplifier (s):Vibe Audio litebox SuperCar stereo (Arc 125.4)
Car PC: none
Sound deadening: Raam Audio throughout, full kit deal
Wires: stinger, 4 gauge power and ground, 14 and 16 ga. Monster RCAs
Other: Stinger battery terminals, doorplates from member (audiophile)
Box: fiberglas
System Cost: cheap enough, approx $1600
Install Cost:There may have been a $20 copay in there
Model: Grand Sport
Head Unit: Pioneer AVIC
Processor:
Front Speakers: polk audio mm6501
Rear Speakers: stock fill
Sub: Polk Audio MM1202, fiberglas encloser and leather wrapped to match interior.
Amplifier (s):Vibe Audio litebox SuperCar stereo (Arc 125.4)
Car PC: none
Sound deadening: Raam Audio throughout, full kit deal
Wires: stinger, 4 gauge power and ground, 14 and 16 ga. Monster RCAs
Other: Stinger battery terminals, doorplates from member (audiophile)
Box: fiberglas
System Cost: cheap enough, approx $1600
Install Cost:There may have been a $20 copay in there
#153
Instructor
Year: 2009
Model: Z06
Head Unit: Kenwood DNX9980HD
Processor:
Front Speakers: JL Audio C3-650
Rear Speakers: JL Audio C5-525
Sub (s): 2 JL Audio 10W6
Amplifier (s): JL Audio HD 750/1 & HD 600/4
Car PC: None
Sound deadening:
Wires: Stinger
Other: Stinger 50 Farad Capacitor, rear view camera, led lighting for amps and subs
Box: Custom fiberglass enclosure
System & Install Cost: too much....but worth it.
Model: Z06
Head Unit: Kenwood DNX9980HD
Processor:
Front Speakers: JL Audio C3-650
Rear Speakers: JL Audio C5-525
Sub (s): 2 JL Audio 10W6
Amplifier (s): JL Audio HD 750/1 & HD 600/4
Car PC: None
Sound deadening:
Wires: Stinger
Other: Stinger 50 Farad Capacitor, rear view camera, led lighting for amps and subs
Box: Custom fiberglass enclosure
System & Install Cost: too much....but worth it.
Last edited by patb23; 07-04-2011 at 06:13 PM.
#154
Melting Slicks
Year: 2009
Model: ZHZ Vert. 2LT
Head Unit: Stock, non-Bose single CD
Processor: AudioControl DQXS
Front Speakers: Focal PS165
Rear Speakers: Focal PS130
Subs: Pioneer TSSW251 10" (2)
Sub Box: VettNuts fiberglass corner pods (2)
Amplifiers: ARC XDi804 & ARC XDi805
Car PC: NOPE
Sound deadening: VetteNuts, Raam, MidAmerica, S.D. Showdown
Wires: Monster
Other: AudioControl Matrix line driver, noise filters, lighting, remotes, pillar tweets, heat and elec. shielding, cell-antenna booster ...
System Cost: $4880
Install Cost: My sweat
Model: ZHZ Vert. 2LT
Head Unit: Stock, non-Bose single CD
Processor: AudioControl DQXS
Front Speakers: Focal PS165
Rear Speakers: Focal PS130
Subs: Pioneer TSSW251 10" (2)
Sub Box: VettNuts fiberglass corner pods (2)
Amplifiers: ARC XDi804 & ARC XDi805
Car PC: NOPE
Sound deadening: VetteNuts, Raam, MidAmerica, S.D. Showdown
Wires: Monster
Other: AudioControl Matrix line driver, noise filters, lighting, remotes, pillar tweets, heat and elec. shielding, cell-antenna booster ...
System Cost: $4880
Install Cost: My sweat
#155
Racer
Member Since: Feb 2009
Location: shelbyville TN.
Posts: 320
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2002
Model: vert
Head Unit: Alpine 9886
Front Speakers: MB Quart , tweeters & cross overs
Rear Speakers: JL
Sub: 2 x 10" JL's
Amplifier (s) (Arc 125.4) & (ARC 600.1)
Car PC: none
Sound deadening: vettenuts insulation kit and their premium layer
Wires: stinger, Monster RCAs
Box: custom fiberglass boxes from vette nuts with their custom amp rack and partition divider
System Cost:
Model: vert
Head Unit: Alpine 9886
Front Speakers: MB Quart , tweeters & cross overs
Rear Speakers: JL
Sub: 2 x 10" JL's
Amplifier (s) (Arc 125.4) & (ARC 600.1)
Car PC: none
Sound deadening: vettenuts insulation kit and their premium layer
Wires: stinger, Monster RCAs
Box: custom fiberglass boxes from vette nuts with their custom amp rack and partition divider
System Cost:
#156
Pro
Year: 2007
Model: base, 3lt, z51. ECS/Paxton 1500. 720 whpr, 643 tq
Head Unit: Alpine Ina 910w
Processor: Alpine PXA H800
Front Speakers: Focal Utopia Be. 6 3/4" (door) and tweeter (pillar)
Rear Speakers: uh, why
Sub (s): JL Audio 13 TW 5
Amplifier (s): 2 Zapco 4.0s, 1 Zapco 9.0. (2800 watts RMS)
Car PC: I surf for **** at home
Sound deadening: DynaMat
Wires: Monster and Zapco Symbilink
Other: leather, plexiglas, fiberglass and resin, bondo, liquid nails, caulk, wood/MDF, screws, sand paper, paint, carpet, modeling clay, solder, liquor
Box: custom
System Cost: I stopped counting dollars spent on car audio during 1991.
Install Cost:. Nada. Being done by myself and friends. In the infancy of install and planning now.
Model: base, 3lt, z51. ECS/Paxton 1500. 720 whpr, 643 tq
Head Unit: Alpine Ina 910w
Processor: Alpine PXA H800
Front Speakers: Focal Utopia Be. 6 3/4" (door) and tweeter (pillar)
Rear Speakers: uh, why
Sub (s): JL Audio 13 TW 5
Amplifier (s): 2 Zapco 4.0s, 1 Zapco 9.0. (2800 watts RMS)
Car PC: I surf for **** at home
Sound deadening: DynaMat
Wires: Monster and Zapco Symbilink
Other: leather, plexiglas, fiberglass and resin, bondo, liquid nails, caulk, wood/MDF, screws, sand paper, paint, carpet, modeling clay, solder, liquor
Box: custom
System Cost: I stopped counting dollars spent on car audio during 1991.
Install Cost:. Nada. Being done by myself and friends. In the infancy of install and planning now.
#157
Melting Slicks
Year: 1999
Model: Fixed Roof Coupe
Head Unit: JVC - R80BT
Front Speakers: Boston SC60 components
Rear Speakers: Boston SE50 components
Sub (s): 1 ARC 10 DVC
Amplifier (s): 1 Alpine m500 mon for sub, 1 Arc 300.4 for the speakers
Sound deadening: None
Wires: Kicker
Box: Double D mod custom flushmount trunk box
System Cost: $1500ish
Install Cost: $450ish
Model: Fixed Roof Coupe
Head Unit: JVC - R80BT
Front Speakers: Boston SC60 components
Rear Speakers: Boston SE50 components
Sub (s): 1 ARC 10 DVC
Amplifier (s): 1 Alpine m500 mon for sub, 1 Arc 300.4 for the speakers
Sound deadening: None
Wires: Kicker
Box: Double D mod custom flushmount trunk box
System Cost: $1500ish
Install Cost: $450ish
Last edited by RideZX6R; 05-22-2012 at 01:19 PM.
#158
Burning Brakes
Year: 1999
Model: Corvette Coupe
Head Unit: JVC - KD-AVX44 - http://www.jvc.eu/kd-avx44/
Processor: Stock
Front Speakers: Stock Bose
Rear Speakers: Stock Bose
Sub (s): Stock
Amplifier (s): JVC / Stock Bose
Car PC: None
Sound deadening: None
Wires: PAC-ROEM-VET1 & 18 Gauge wire from Canadian Tire
Other: JVC KS-SRA100 & Sirius SCC1C Tuner Vehicle Connect
Box: None
System Cost: HU - 349$, Sirius Adapters - 118$, PAC-ROEM $49.99, SIRIUS Antenna $20.99 = $607.92 TX included
Install Cost: HUMount - $75.00, Cage, 20.99$, 10$ in wires & butt connectors = $119.77 Tx Included
Total Cost: $727.69 CDN.
Model: Corvette Coupe
Head Unit: JVC - KD-AVX44 - http://www.jvc.eu/kd-avx44/
Processor: Stock
Front Speakers: Stock Bose
Rear Speakers: Stock Bose
Sub (s): Stock
Amplifier (s): JVC / Stock Bose
Car PC: None
Sound deadening: None
Wires: PAC-ROEM-VET1 & 18 Gauge wire from Canadian Tire
Other: JVC KS-SRA100 & Sirius SCC1C Tuner Vehicle Connect
Box: None
System Cost: HU - 349$, Sirius Adapters - 118$, PAC-ROEM $49.99, SIRIUS Antenna $20.99 = $607.92 TX included
Install Cost: HUMount - $75.00, Cage, 20.99$, 10$ in wires & butt connectors = $119.77 Tx Included
Total Cost: $727.69 CDN.
#159
Advanced
Member Since: Dec 2011
Location: Fort Worth Texas
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
St. Jude Donor '12
2004 Corvette sound system
Year: 2004
Model: Convertable
Head Unit:
Kenwood DNX6990HD
Processor: N/A
Front Speakers:
Focal Performance PS 165 (6.5in)
Focal Performance PC 130 (5in)
Rear Speakers:
Focal Integration IC 30 (5in)
Sub:
Alpine Type-R SWR-104D (1ea)
Amplifier:
JL audio 900/5
Sound deadening:
Ensolite Insulation Layer kit w/heat foil
Damplifier Pro
Wires:
Rockford Fosgate RFK4D install kit
Stinger Battery Terminals
Rockford Fosgate Maxi fuse holders
Other:
DoubleD Mods Double DIN Bezel for DNX6990HDJL
Odyssey Battery 34/78 PC 1500DT
"Big 3" upgrade. Rockford Fosgate 4 awg.
JL Audio Remote Bass Control
Antenna Override switch
Box:
SubThump 10" Stealth Enclosure
System Cost:
Don't want to know.
Install Cost:
Clean install by AutoSound Bedford, Tx. I highly recommend them! Not the cheapest, but you don't want the cheapest! They know their way around Corvettes.
Model: Convertable
Head Unit:
Kenwood DNX6990HD
Processor: N/A
Front Speakers:
Focal Performance PS 165 (6.5in)
Focal Performance PC 130 (5in)
Rear Speakers:
Focal Integration IC 30 (5in)
Sub:
Alpine Type-R SWR-104D (1ea)
Amplifier:
JL audio 900/5
Sound deadening:
Ensolite Insulation Layer kit w/heat foil
Damplifier Pro
Wires:
Rockford Fosgate RFK4D install kit
Stinger Battery Terminals
Rockford Fosgate Maxi fuse holders
Other:
DoubleD Mods Double DIN Bezel for DNX6990HDJL
Odyssey Battery 34/78 PC 1500DT
"Big 3" upgrade. Rockford Fosgate 4 awg.
JL Audio Remote Bass Control
Antenna Override switch
Box:
SubThump 10" Stealth Enclosure
System Cost:
Don't want to know.
Install Cost:
Clean install by AutoSound Bedford, Tx. I highly recommend them! Not the cheapest, but you don't want the cheapest! They know their way around Corvettes.
#160
Corvette Enthusiast
Member Since: Oct 2005
Location: Troy & Dearborn, Michigan
Posts: 5,339
Received 917 Likes
on
610 Posts
Here is mine (pieced together over time as speakers were done alone first)
Year: 2008
Model: 4LT Coupe
Head Unit: Pioneer AVIC-Z140BH w/ 2013 Maps
Processor: None
Front Speakers: Boston Acoustic S35 for center and uppers, lowers are Stock Bose
Rear Speakers: Boston Acoustic S55
Sub(s): None
Amplifier(s): Stock
Car PC: None
Sound deadening: None
Wires: Car adapter (PAC OS-2C-BOSE), blade connectors crimped onto wires (local HW store), stock speaker connector adapters (Metra 72-4568), antenna adapter (Metra 40-GM20), universal sat radio adapter Y-cable (the Internet), iPod adapter (Pioneer CD-IU51V)
Other: SWC controls (Metra Axxess ASWC), back-up camera (Pioneer ND-BC5), traffic tuner (Pioneer ND-TMC10), radio bezel (Metra 95-3304)
Box: None
System Cost: $1700
Install Cost: $0 + Time (I did it myself)
Year: 2008
Model: 4LT Coupe
Head Unit: Pioneer AVIC-Z140BH w/ 2013 Maps
Processor: None
Front Speakers: Boston Acoustic S35 for center and uppers, lowers are Stock Bose
Rear Speakers: Boston Acoustic S55
Sub(s): None
Amplifier(s): Stock
Car PC: None
Sound deadening: None
Wires: Car adapter (PAC OS-2C-BOSE), blade connectors crimped onto wires (local HW store), stock speaker connector adapters (Metra 72-4568), antenna adapter (Metra 40-GM20), universal sat radio adapter Y-cable (the Internet), iPod adapter (Pioneer CD-IU51V)
Other: SWC controls (Metra Axxess ASWC), back-up camera (Pioneer ND-BC5), traffic tuner (Pioneer ND-TMC10), radio bezel (Metra 95-3304)
Box: None
System Cost: $1700
Install Cost: $0 + Time (I did it myself)
Last edited by LT1 Z51; 01-25-2014 at 11:06 PM.