When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I am gathering some new stereo equipment to install in my 89. I am just going to add a new head unit and speakers at this point and not adding any amps or subs. I just want decent sound and my old bose system buzzes and whines so much I can't even stand to turn it on.
I have being doing some research and I have read a couple articles that advise putting in a 160hz notch filter for the door speakers. I have also read that you can help/fix this resonance problem with sound deadener.
I am using 6.5 inch speakers in the front and 6x9's in the rear. I am going to run extra wires incase I decide to add an amp and subwoofer later on.
So I guess my question is, do I need to add a filter to the front speakers or would I be better off adding some sound deadening to the doors instead ?
I am going to do a tune up as well, new plugs and wires. The old bose speakers sometimes take 15 minutes or so to kick on, I am sure they are shot. I am going to replace them with some Pioneer speakers and Pioneer head unit. I am also running new speaker wires.
It should sound light years ahead of the bose you will be happy... feel free to ask questions ill be more then willing to help as well as other memebers as well
the old notch filter....wow I haven't heard that in awhile. I had a headunit back in the 80's with that button on it. With today's signal processors/equalizers the notch filter is no longer needed as that peak can be attenuated that way.
IMO, definetely do some sound deadnening on the door panels. Here is a link to the stuff I use.
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Slideshow: A Jaguar designer's personal project imagines what a modern front-engined Corvette might look like if Chevrolet revisited the golden age of the Stingray.