Harness for C6 1SA?
Thread Starter
Melting Slicks
Joined: Mar 2004
Posts: 2,130
Likes: 5
From: Seattle WA
Harness for C6 1SA?
I am looking for a harness for the 2005 C6 1SA. I am looking to add a different HU and I am hoping there is an existing harness to make the connection easy while retaining the functionality (door chime, etc.). Any suggestions?
Thanks.
Thanks.
Instructor
Joined: Jun 2005
Posts: 176
Likes: 0
From: Warrenville IL
Originally Posted by S2K
I am looking for a harness for the 2005 C6 1SA. I am looking to add a different HU and I am hoping there is an existing harness to make the connection easy while retaining the functionality (door chime, etc.). Any suggestions?
Thanks.
Thanks.
Metra GM-os04--
works
Thread Starter
Melting Slicks
Joined: Mar 2004
Posts: 2,130
Likes: 5
From: Seattle WA
Originally Posted by techguy
Metra GM-os04--
works
works
Instructor
Joined: Jun 2005
Posts: 176
Likes: 0
From: Warrenville IL
Originally Posted by S2K
Thanks. Can you confirm that you have tried this and found it to work with the 1SA model? Does it fit all aftermarket stereos?
Yes sir I can ....
Ive done Several new C6's --
Works ...
Thread Starter
Melting Slicks
Joined: Mar 2004
Posts: 2,130
Likes: 5
From: Seattle WA
Originally Posted by techguy
Yes sir I can ....
Ive done Several new C6's --
Works ...
Ive done Several new C6's --
Works ...
Incidentally, have you tried a PAC C2R-GM24? I understand that might also work. Curious if one is better than the other.
To bother you on one more point since you indicate that you have done serveral C6's. Can you say what HU's were put in?
Thanks again!
Burning Brakes
Joined: Mar 2006
Posts: 752
Likes: 0
From: dallas tx
no harness is needed
i have 06 vette, no onstar, no bose...harness not needed..
I soldered male RCA plug the the 8 low level inputs in the factory harness...then plug it into the new HU RCA...
Connect the white wire from the factory harness to the antenna ouput on the new HU...done
I soldered male RCA plug the the 8 low level inputs in the factory harness...then plug it into the new HU RCA...
Connect the white wire from the factory harness to the antenna ouput on the new HU...done
