Sound Deadning ?
Le Mans Master
Joined: Aug 2005
Posts: 7,201
Likes: 0
From: DP(oh you know where) IL
St. Jude Donor '06
you can also go with edead from elemental designs. They have there stuff on sale for .60 cents a sq ft. Great deal. I would think that 80-100sq ft should have you covered to do the entire car, including doors and other odds and ends. You can always use the extra in the wheel wells
Drifting
Joined: Jul 2005
Posts: 1,506
Likes: 5
From: Milpitas CA
I don't know exactly how much it takes to do the car but you should read this before deciding which brand to use.
http://www.sounddeadenershowdown.com/
Dog
http://www.sounddeadenershowdown.com/
Dog
Le Mans Master
Joined: Aug 2004
Posts: 6,884
Likes: 48
From: Glide Oregon
I had my whole car dynamated. It cut down on the sound some.
http://home.comcast.net/~mbenway/trip5_dynamat.htm
But, switching from the runflats to GS-D3s made an almost equal difference in my opinion.
http://home.comcast.net/~mbenway/trip5_dynamat.htm
But, switching from the runflats to GS-D3s made an almost equal difference in my opinion.
Thread Starter
Intermediate
Joined: Jun 2005
Posts: 40
Likes: 0
Mike1944, did you get any special deal on dynamat or did you pay the reg. price, I know that stuff works well just a bit pricey.
DPG, have you used edead, does it work pretty well?
Thanks again guys.
DPG, have you used edead, does it work pretty well?
Thanks again guys.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
2027 Corvette vs The World: Every C8 vs Its Closest Competitor
Joe Kucinski
10 Most Common Corvette Problems of the Last 20 Years!
Joe Kucinski
Intermediate
Joined: Jun 2006
Posts: 49
Likes: 0
My personal favorite is HushMatt. No need to pre-treat the surfaces, no need for bandaids for all the foil cuts and no need for rollers. By far the easiest to install because it forms easily with your fingertips. Also the sheets do not come all stuck together when you order their bulk packs like the others.
Supporting Tuner
Joined: Sep 2004
Posts: 51,896
Likes: 39
From: ================== Houston, Texas www.englandgreen.com ================== Necessary Evil™ __________
CI 6-7-8-9-10 Veteran
St. Jude Donor '05-'06-'07-'08-'09-'10-'11-'12-'13-'14
Originally Posted by DPG
you can also go with edead from elemental designs. They have there stuff on sale for .60 cents a sq ft. Great deal. I would think that 80-100sq ft should have you covered to do the entire car, including doors and other odds and ends. You can always use the extra in the wheel wells
Le Mans Master
Joined: Aug 2004
Posts: 6,884
Likes: 48
From: Glide Oregon
Originally Posted by FEARPONG
Mike1944, did you get any special deal on dynamat or did you pay the reg. price, I know that stuff works well just a bit pricey.
Le Mans Master
Joined: Aug 2005
Posts: 7,201
Likes: 0
From: DP(oh you know where) IL
St. Jude Donor '06
ive used there liquid deadner with some success, it got rid of a lot of rattles and squeeks. Not as much as the mat stuff would. I havent used their mats yet. I was thinking about getting the mats to layer on top of the liquid stuff when i get the time and funds to do it. I'm pretty sure pentavolvo(greg) has used their stuff and was really happy with it as so were others. They also have different types as well to match what your needs are.
