LED's for HVAC Controller
Thread Starter
Pro
Joined: Sep 2002
Posts: 688
Likes: 0
From: Rye Brook, NY
LED's for HVAC Controller
I want to add blue and red LED's to my HVAC controller. Please tell me how to wire approximately 15 LED's together to be powered by one lead. I want to do this standalone and leave current light bulbs intact and eventually shut the regular bulbs off. Any suggestions? I have a damaged HVAC controller to mess with. Thanks.
Instructor
Joined: Jan 2006
Posts: 240
Likes: 0
From: St Louis MO
Thread Starter
Pro
Joined: Sep 2002
Posts: 688
Likes: 0
From: Rye Brook, NY
Originally Posted by pk1
That is exactly what I was looking for.
Instructor
Joined: Jan 2006
Posts: 240
Likes: 0
From: St Louis MO
Sorry but I dont have the time. Other people have done this mod by soldering the LEDs with resistors to the PCB. I could not get even illumination doing it that way. This is way I chose this route but it is very time consuming.
Thread Starter
Pro
Joined: Sep 2002
Posts: 688
Likes: 0
From: Rye Brook, NY
Originally Posted by pk1
Sorry but I dont have the time. Other people have done this mod by soldering the LEDs with resistors to the PCB. I could not get even illumination doing it that way. This is way I chose this route but it is very time consuming.
Pro
Joined: Aug 2005
Posts: 642
Likes: 0
From: Center Line MI
Originally Posted by pk1
I did my HVAC and let me tell you what It was a pain in the butt if some one came up with a plan to do this they would make some money.....( I will not do it again)
http://forums.corvetteforum.com/show...1373431&page=5
