Keyless entry prob need some help
Thread Starter
Pro
Joined: Jul 2006
Posts: 688
Likes: 12
From: Detroit - Buffalo - Houston
Keyless entry prob need some help
Ok i had a bose steroe in my car (97 c5 m6) and i pulled that and threw in a pioneer hu I used the acc power from the ignition and the main power from the battery line going into the fuse box in the pass flow. I growned the hu to the metal dash frame...pulled the radio/bose fuse and the big bose fuse ?(not a fuse but that big square thinger)....here lies the problem....the power doors/windows all work but the key fob will not work ?! My back up one won't work either and it was working b4 the swap any ideas ? this is a pain in my butt! thanks for the help
Le Mans Master
Joined: Aug 2005
Posts: 7,201
Likes: 0
From: DP(oh you know where) IL
St. Jude Donor '06
also, when i swapped out my HU i didnt remove any fuses. Before trying the relearn on the FOBs, try reinstalling the fuses. You shouldnt have to remove any fuses
Thread Starter
Pro
Joined: Jul 2006
Posts: 688
Likes: 12
From: Detroit - Buffalo - Houston
aighty i did take off the hot lead from the battery so i'll have to do that relaern thing...i figured i mind as well pull the fuses so there wasn't unessary power runing around lol i have been using my key for the past 2 weeks and getting kinda worried....i did a continuity test on all my fuses just to make sure too lol thanks again i'll let u guys know 2marrow how it goes
