HU mounting depth
Thread Starter
Le Mans Master
Joined: Aug 2005
Posts: 7,201
Likes: 0
From: DP(oh you know where) IL
St. Jude Donor '06
HU mounting depth
I forgot who but some one asked for the mounting depth of the HU. This measurement was taken from the back of the opening to the faceplate. SO figure an extra 1/4" if you count the face of the HU. At the top of the opening I got 7" and at the bottom of the opening I got 7 3/4" to the back.
Hope this helps.
Hope this helps.
Instructor
Joined: Feb 2005
Posts: 102
Likes: 0
From: Alta Loma CA
I forgot who but some one asked for the mounting depth of the HU. This measurement was taken from the back of the opening to the faceplate. SO figure an extra 1/4" if you count the face of the HU. At the top of the opening I got 7" and at the bottom of the opening I got 7 3/4" to the back.
Hope this helps.
Hope this helps.
. Thank you very much. This helps a lot 
!!
