Removing the CD Changer Brackets
Thread Starter
Melting Slicks
Joined: Jul 2005
Posts: 2,586
Likes: 2
From: Bardstown Kentucky
Removing the CD Changer Brackets
What a pain! Why does nobody have detailed instructions on this? I got a sub for my car and had to remove those brackets it was time consuming to say the least. I am doing another install this weekend and may take some photos.
Thread Starter
Melting Slicks
Joined: Jul 2005
Posts: 2,586
Likes: 2
From: Bardstown Kentucky
I guess it depends on the year. On my 99 FRC I had to cut the bolts that were going through the brackets and push them out the back. They were in a tight spot up against the frame rail so they had to be cut.
On this next install its a stock unit so I am going to have to relocate the changer. Its a 98, does anyone know what I am going to need to do on this one?
On this next install its a stock unit so I am going to have to relocate the changer. Its a 98, does anyone know what I am going to need to do on this one?
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
