AVIC F700BT problems

Reply Subscribe

Thread Tools

Search this Thread

Jun 22, 2008 | 11:48 AM

jnx911

Thread Starter

Melting Slicks

Joined: Nov 2005

Posts: 2,022

Likes: 0

From: Belleville Illinois

AVIC F700BT problems

I installed this in my 08 Z without Bose and I can't get any sound other than a beeping noise and static from the front speakers. I wired in the relay per the instructions and got no sound at all front or rear so I removed the relay and got rear sound only. I used a GMOS-04 and am wondering if I needed a GMOS-01? Does anybody know the answer to this?

Thanks.

Jun 22, 2008 | 11:53 AM

pentavolvo

Le Mans Master

Joined: Nov 2004

Posts: 8,718

Likes: 20

From: Dyer IN

Cruise-In IX Veteran

i PMed you back but dbl check your connections you could have a loose connection somewhere. GM0S04 is such a POS though the engineering behind it was horriable everyone has problems with it.

Jun 22, 2008 | 12:16 PM

jnx911

Thread Starter

Melting Slicks

Joined: Nov 2005

Posts: 2,022

Likes: 0

From: Belleville Illinois

I soldered all connections. I got your pm. Would I need both GMAH24 and GMAHCM in place of the GMOS-04? Where would I buy these?

Thanks,
Jay

Jun 22, 2008 | 03:30 PM

RanGer498

Melting Slicks

Joined: Jun 2001

Posts: 2,504

Likes: 0

From: NYC NJ

Quote:

Originally Posted by jnx911

I soldered all connections. I got your pm. Would I need both GMAH24 and GMAHCM in place of the GMOS-04? Where would I buy these?

Thanks,
Jay

http://www.discountcarstereo.com/detail.aspx?ID=275
http://www.discountcarstereo.com/detail.aspx?ID=277

also try another relay the one you have might be bad .

Reply Subscribe