Amp Install Problems - Need help from stereo gurus!
Thread Starter
Racer
Joined: Jan 2009
Posts: 250
Likes: 2
Amp Install Problems - Need help from stereo gurus!
Ok. I think the problem is with my "turn on wire".
My set up is as follows:
Aoem-vet1 harness
Alpine m50 amp
JL Sub
What do I with the green wire and what do i do with the blue wire with the white stripe?
Right now I have the green wire connected to the green wire on the black wiring harness.
The blue wire with white stripe is connected to the amp.
What am i missing here?
My set up is as follows:
Aoem-vet1 harness
Alpine m50 amp
JL Sub
What do I with the green wire and what do i do with the blue wire with the white stripe?
Right now I have the green wire connected to the green wire on the black wiring harness.
The blue wire with white stripe is connected to the amp.
What am i missing here?
Tech Contributor
Joined: May 2003
Posts: 7,035
Likes: 134
From: North Augusta, SC
C5 prints are HERE
Somehow you need to trigger the amp to come on by connecting it to the dark green wire at pin 8 of radio plug C1. If you do it directly or through the aoem shouldn't matter.
Somehow you need to trigger the amp to come on by connecting it to the dark green wire at pin 8 of radio plug C1. If you do it directly or through the aoem shouldn't matter.
