C5 double din install help
Thread Starter
5th Gear
Joined: Dec 2016
Posts: 5
Likes: 0
C5 double din install help
I just purchased a 2002 z06 that was in the process of doing a double din install. So far everything seems wired up correctly and all I had to do was connect power to it. I tried fuse tapping #22 and connecting to the taped yellow wire by fuse box. Still get no power with key on. They did leave; mute, reverse and this random cream wire(directly off headunit) open with no attachments.
Kenwood DDX672BH Headunit
They used the PAC OEM-1 for the wire adapter. There is a random blue/white wire that comes off on of the harness with no where to connect.
It seems grounded correctly but I wonder if I could splice into radio harness and try grounding directly to that taped black wire?
Kenwood DDX672BH Headunit
They used the PAC OEM-1 for the wire adapter. There is a random blue/white wire that comes off on of the harness with no where to connect.
It seems grounded correctly but I wonder if I could splice into radio harness and try grounding directly to that taped black wire?
Team Owner
Joined: May 2000
Posts: 53,804
Likes: 5,634
From: Plantation Florida USAF(Retired) 1966-1990
U.S. Air Force
St. Jude Donor '05 thru '26
NCM Sinkhole Donor
It's time to call Dennis, the master of corvette radio install, and knowledge along with selling best radio's on the market, at the best price.
http://www.doubledmods.com
http://www.doubledmods.com
