Power cable, RCA jacks $300?
Race Director
Joined: Jan 2008
Posts: 16,028
Likes: 170
From: oregon
You're right, a really good deal! It adds up to $1700 worth of stuff so, Thanks for the heads up! However, this is what I'm thinking.
The speakers, krx2 are $650 at Amazon
The pc130's I don't really need, I think the fill is unnecessary.
I'll pay $100 more for the morel MPS 5.950 amp $650
The dealer in Philly offered me the Hybrid 602's for $550.
If I bought the same wires I'd be at $1320.
$320 is a good savings but I get a better amp and I guess I really want those Morels so, I'm leaning that way.
The speakers, krx2 are $650 at Amazon
The pc130's I don't really need, I think the fill is unnecessary.
I'll pay $100 more for the morel MPS 5.950 amp $650
The dealer in Philly offered me the Hybrid 602's for $550.
If I bought the same wires I'd be at $1320.
$320 is a good savings but I get a better amp and I guess I really want those Morels so, I'm leaning that way.
so god damn.....
Le Mans Master
Joined: Jan 2017
Posts: 6,139
Likes: 1,962
From: Morris County New Jersey
You're right, a really good deal! It adds up to $1700 worth of stuff so, Thanks for the heads up! However, this is what I'm thinking.
The speakers, krx2 are $650 at Amazon
The pc130's I don't really need, I think the fill is unnecessary.
I'll pay $100 more for the morel MPS 5.950 amp $650
The dealer in Philly offered me the Hybrid 602's for $550.
If I bought the same wires I'd be at $1320.
$320 is a good savings but I get a better amp and I guess I really want those Morels so, I'm leaning that way.
The speakers, krx2 are $650 at Amazon
The pc130's I don't really need, I think the fill is unnecessary.
I'll pay $100 more for the morel MPS 5.950 amp $650
The dealer in Philly offered me the Hybrid 602's for $550.
If I bought the same wires I'd be at $1320.
$320 is a good savings but I get a better amp and I guess I really want those Morels so, I'm leaning that way.
I don't mean to steer you in a different direction, just saw that near you so I just wanted to throw it out there.
Last edited by TorchRedFred; Oct 15, 2017 at 02:21 PM.
Thread Starter
Advanced
Joined: May 2013
Posts: 88
Likes: 0
So, just waiting for the installer to be available and the speakers and sub to arrive now. Also shopping for F/R cameras.
Race Director
Joined: Jan 2008
Posts: 16,028
Likes: 170
From: oregon
Ok Fred, I stand corrected on the speakers. I appreciate the heads up on this system too, It's a REALLY good deal! So, I have received the Morel MPS 9.590 amp from Perzan and the head unit DDX9903s from Crutchfield. I went with the 9903s instead of the 9904s because it's the same unit, only with DVD and it was $550. The 602 Hybrids will be delivered directly from Morel, along with the remote sub control, although I bought them from Perzan. Sub is from Vettenuts and shipped already with the 10w3v3 installed. Mark tells me it's a pretty tight fit in the c6 cubby so, bolting it in is not needed. I like NOT drilling holes in the car. So, just waiting for the installer to be available and the speakers and sub to arrive now. Also shopping for F/R cameras.
So, just waiting for the installer to be available and the speakers and sub to arrive now. Also shopping for F/R cameras.9904s was a major improvement and cost between the two is about the same with an avg 550 street price. they were on a doorbuster via newegg the other day for 400 shipped. sale lasted about 4-5 hours
Last edited by racebum; Oct 21, 2017 at 03:10 PM.
Thread Starter
Advanced
Joined: May 2013
Posts: 88
Likes: 0
not the same unit. the 9904s doesn't have the high noise floor when tethered to carplay or auto android. it has a faster processor and a slightly different sound. the carplay / AA issues on the 9903 were substantial.
9904s was a major improvement and cost between the two is about the same with an avg 550 street price. they were on a doorbuster via newegg the other day for 400 shipped. sale lasted about 4-5 hours
9904s was a major improvement and cost between the two is about the same with an avg 550 street price. they were on a doorbuster via newegg the other day for 400 shipped. sale lasted about 4-5 hours
I guess I'll send it back and exchange it for the 9904s!
I really don't know what a, "high noise floor" means or even what AA issues are, but I'll take your word for it.
THANKS!
Race Director
Joined: Jan 2008
Posts: 16,028
Likes: 170
From: oregon
Thread Starter
Advanced
Joined: May 2013
Posts: 88
Likes: 0
Race Director
Joined: Jan 2008
Posts: 16,028
Likes: 170
From: oregon
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Thread Starter
Advanced
Joined: May 2013
Posts: 88
Likes: 0
The 9904 is already ordered and will ship as soon as Crurchfield receives the 9903. Thank You Very Much! may you reap what you have sewn, ten fold. I’m going to build my own amp rack now, something simple but maybe led lights behind the amp and crossovers. Any thoughts on hiding vs displaying crossovers?
Race Director
Joined: Jan 2008
Posts: 16,028
Likes: 170
From: oregon
Ok, I returned the 9903 to UPS and since I didn’t open the box, The nice lady at UPS considered it a “refused delivery”. Saved me $10 The 9904 is already ordered and will ship as soon as Crurchfield receives the 9903. Thank You Very Much! may you reap what you have sewn, ten fold. I’m going to build my own amp rack now, something simple but maybe led lights behind the amp and crossovers. Any thoughts on hiding vs displaying crossovers?
The 9904 is already ordered and will ship as soon as Crurchfield receives the 9903. Thank You Very Much! may you reap what you have sewn, ten fold. I’m going to build my own amp rack now, something simple but maybe led lights behind the amp and crossovers. Any thoughts on hiding vs displaying crossovers?
Thread Starter
Advanced
Joined: May 2013
Posts: 88
Likes: 0
Got most of my new stuff. I’m building my own amp rack so, if this picture comes through, I’ll add that picture next. Thanks to torchredfred and racebum for for their help and advice thus far.
https://www.corvetteforum.com/g/album/8493095
https://www.corvetteforum.com/g/album/8493095
Le Mans Master
Joined: Jan 2017
Posts: 6,139
Likes: 1,962
From: Morris County New Jersey
Got most of my new stuff. I’m building my own amp rack so, if this picture comes through, I’ll add that picture next. Thanks to torchredfred and racebum for for their help and advice thus far.
https://www.corvetteforum.com/g/album/8493095
https://www.corvetteforum.com/g/album/8493095
Looks like Santa Claus stopped by your house early this year. Some good stuff right there. Keep us posted.
Thread Starter
Advanced
Joined: May 2013
Posts: 88
Likes: 0
It will be covered with carpet, Lexan, (painted on the bottom) will go next. The amp and crossovers will be suspended ½” above the lexan with leds adhered to bottom of the amp and crossovers. It will lay flat in the trunk, behind the seats.
https://www.corvetteforum.com/g/picture/8508725
https://www.corvetteforum.com/g/picture/8508725
Thread Starter
Advanced
Joined: May 2013
Posts: 88
Likes: 0
There are a couple more in my profile under stereo. Please let me know if
You can’t see them and I’ll fix it. I still have to go back, the midrange speakers don’t do much unless I crank them up with the EQ. By don’t do much I mean they are pretty much absent. I think it’s something in the way the crossovers are set up. Not like I know, I googled possible solutions and quickly realized I do not speak the lingo
I saw the installer move some tiny red caps on the crossovers, maybe that’s got something to do with it.... that’s about the extent of my understanding.
