Factory Nav Plug Question
Thread Starter
Heel & Toe
Joined: Aug 2009
Posts: 21
Likes: 0
From: Saskatchewan
Factory Nav Plug Question
I have removed my factory Bose Nav Radio to replace it with a Kenwood unit.
This plug went into the back of the Bose but I'm not sure what it does.
It's an 8 pin connector with just 2 wires, pink and pink/black
Any idea what it's for?
https://www.corvetteforum.com/forums...1&d=1521507946
This plug went into the back of the Bose but I'm not sure what it does.
It's an 8 pin connector with just 2 wires, pink and pink/black
Any idea what it's for?
https://www.corvetteforum.com/forums...1&d=1521507946
Thread Starter
Heel & Toe
Joined: Aug 2009
Posts: 21
Likes: 0
From: Saskatchewan
I'm replacing the factory Bose Nav unit with a Kenwood DMX7704s and
using the PAC RP5-GM11 for the conversion. Nothing in the instructions about this plug.
Do I just leave it unplugged and tucked away in the dash?
using the PAC RP5-GM11 for the conversion. Nothing in the instructions about this plug.
Do I just leave it unplugged and tucked away in the dash?
