Where to tap 12v Illumination Source for Head Unit
Thread Starter
Advanced
Joined: Nov 2002
Posts: 94
Likes: 0
From: McDonough GA
Where to tap 12v Illumination Source for Head Unit
I am trying to use my auto-dim on a Kenwood X859 Head unit. It requires a 12v signal to trigger the dim mode.
I tried tapping off of pin 30 on relay 44 in the fuse box as mentioned in an old post but this supplies a constant 12v. I need a parking or headlight on only 12v.
I have a 99. I assume since I have no twilight sentinel that this is why relay 44 does not offer the switched 12v I need.
Any ideas where to tap from? Thanks!
[Modified by Slee_Stack, 4:12 AM 12/31/2002]
I tried tapping off of pin 30 on relay 44 in the fuse box as mentioned in an old post but this supplies a constant 12v. I need a parking or headlight on only 12v.
I have a 99. I assume since I have no twilight sentinel that this is why relay 44 does not offer the switched 12v I need.
Any ideas where to tap from? Thanks!
[Modified by Slee_Stack, 4:12 AM 12/31/2002]
Advanced
Joined: Aug 2002
Posts: 50
Likes: 0
From: Frederick MD
Re: Where to tap 12v Illumination Source for Head Unit (Slee_Stack)
I asked this question a week ago here is the thread:
http://forums.corvetteforum.com/zerothread?id=454325
Hope it helps! :seeya
http://forums.corvetteforum.com/zerothread?id=454325
Hope it helps! :seeya
