FS: Switches/Gauges Clusters
Thread Starter
Melting Slicks
Joined: Sep 2001
Posts: 2,301
Likes: 5
From: Bedford, IN
Switches/Gauges Clusters
Sold speedometer/Tach/Shift Light
Crashed our 96 track car, so we're selling out.
If you're building a track car, here's your opportunity to save a ton of time!!!!!
I spent a boatload of time and effort on these and they performed better than expected. Too bad they couldn't help with traction!!
One switch and gauge panel pre-wired with disconnects.
One fuse and relay panel pre-wired with disconnect.
All wires are labeled for easy set up.
$300 shipped lower 48
**EDIT I will laser cut aluminum gauge/switch panel/panels to your drawings/dimensions/configuration at no cost!!!!! (you wire it and pay shipping)
Crashed our 96 track car, so we're selling out.
If you're building a track car, here's your opportunity to save a ton of time!!!!!
I spent a boatload of time and effort on these and they performed better than expected. Too bad they couldn't help with traction!!
One switch and gauge panel pre-wired with disconnects.
One fuse and relay panel pre-wired with disconnect.
All wires are labeled for easy set up.
$300 shipped lower 48
**EDIT I will laser cut aluminum gauge/switch panel/panels to your drawings/dimensions/configuration at no cost!!!!! (you wire it and pay shipping)
Last edited by Shrek; Feb 23, 2016 at 06:18 AM.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Grand Sport & Grand Sport X Launch Alongside All-New 535hp LS6 V8!
Michael S. Palmer
5 Reasons Bad Drivers Crash & 5 Ways to Avoid a Costly Mistake!
Joe Kucinski
7 Bolt-On Upgrades From Extreme Online Store to Level Up Your C6 Corvette
Pouria Savadkouei
How Likely Are These Five 2027 Corvette Rumors to Be True?
Brett Foote
9 Best Corvettes You Can Buy for Half Price (& 1 You Should NEVER Buy!)
Joe Kucinski
8 Very Best Corvettes of Amelia Island 2026
Joe Kucinski
Top 10 WORST Corvette Engineering Failures of All Time!
Joe Kucinski
10 Records the C8 Corvette Generation Has SMASHED (& 1 Glaring Failure)
Joe Kucinski
7 Wildest Corvette Concepts Ever Made
Brett Foote
Thread Starter
Melting Slicks
Joined: Sep 2001
Posts: 2,301
Likes: 5
From: Bedford, IN
Thread Starter
Melting Slicks
Joined: Sep 2001
Posts: 2,301
Likes: 5
From: Bedford, IN
^^^Added note to original post^^^
If you purchase this set up...I will laser cut aluminum gauge/switch panel/panels to your drawings/dimensions/configuration at no cost!!!!! (you assemble)
If you purchase this set up...I will laser cut aluminum gauge/switch panel/panels to your drawings/dimensions/configuration at no cost!!!!! (you assemble)
