Post your Race Parts 4 Sale HERE
09-24-2011, 12:33 AM
#2004
Safety Car
For sale
T1 X-pipe - $150 + shipping - SOLD
(4) 18x9.5 "wagon" wheels - $300 + shipping
Purchased to run rain tires, but they won't clear my new Wilwood SL6Rs even with spacers.
Stoptech SS front brake hoses - SOLD
2 stock rear caliper assemblies - SOLD
(4) 18x9.5 "wagon" wheels - $300 + shipping
Purchased to run rain tires, but they won't clear my new Wilwood SL6Rs even with spacers.
Stoptech SS front brake hoses - SOLD
2 stock rear caliper assemblies - SOLD
Last edited by travisnd; 10-10-2011 at 02:19 PM.
09-24-2011, 05:13 PM
#2007
Brand new front and rear DRM poly top shock bushings for C6. New $21.95/set + shipping. Selling for $40 shipped with U.S. I believe they will also fit C4 and C5.
<<<Sold>>>
<<<Sold>>>
Last edited by victorf; 09-27-2011 at 01:21 PM.
09-25-2011, 01:11 PM
#2008
Heel & Toe
Member Since: May 2010
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
C5 harness bar, extensions, and seat bases
Parts are from my c5Z06 Harness bar and driver side seat bracket have been previously installed and since removed. Car is sold, parts are collecting dust.
Hardbar USA Harness bar. No damage, scratches or problems. Have the bolts and spacers to mount the bar. Does not require cutting sail panel to install. Has new mount area for stock seatbelt mounting.
Asking $250
Hardbar USA extra clearance kit. This is the bracket that allows the harness bar to be moved a few inches rearward for seat clearance. I'm 5'10" and never used it. Still in original packing. It think it also allows to raise or lower the bar height. I think anyone over 6' would benefit from the extensions to move seat back.
Asking $125
Details on both parts are on the hardbarusa website.
Driver and passenger side Corbeau seat slider brackets. they are the double spring/lock mechanism sliders so both sides of the rails latch into place. I dont know exactly what seats they will fit but they were originally attached to a seat of Corbeau A4's.
Asking $50.00 each
Prices do not include shipping. I can ship parts via UPS. If you send a zip code I can get a quote for shipping.
I can email photos of any item if requested but the bar is wrapped in bubble wrap so it will take a little time to open it.
I can accept paypal or cash.
Located in CT or Long Island for pick up.
Email with any questions.
Hardbar USA Harness bar. No damage, scratches or problems. Have the bolts and spacers to mount the bar. Does not require cutting sail panel to install. Has new mount area for stock seatbelt mounting.
Asking $250
Hardbar USA extra clearance kit. This is the bracket that allows the harness bar to be moved a few inches rearward for seat clearance. I'm 5'10" and never used it. Still in original packing. It think it also allows to raise or lower the bar height. I think anyone over 6' would benefit from the extensions to move seat back.
Asking $125
Details on both parts are on the hardbarusa website.
Driver and passenger side Corbeau seat slider brackets. they are the double spring/lock mechanism sliders so both sides of the rails latch into place. I dont know exactly what seats they will fit but they were originally attached to a seat of Corbeau A4's.
Asking $50.00 each
Prices do not include shipping. I can ship parts via UPS. If you send a zip code I can get a quote for shipping.
I can email photos of any item if requested but the bar is wrapped in bubble wrap so it will take a little time to open it.
I can accept paypal or cash.
Located in CT or Long Island for pick up.
Email with any questions.
09-25-2011, 03:18 PM
#2009
Instructor
Member Since: May 2009
Location: Philly'ish
Posts: 128
Likes: 0
Received 0 Likes
on
0 Posts
FS: G-Tech Pro RR performance measurement meter.
For Sale, G-Tech Pro RR performance measurement meter.
Complete as shown, in box. Never used.
$150 plus shipping
PM me here with questions.
Thanks,
John
Complete as shown, in box. Never used.
$150 plus shipping
PM me here with questions.
Thanks,
John
09-27-2011, 04:09 PM
#2010
Burning Brakes
Brand NEW LS6 Crate motor (the Cadillac CTS-V one) but works in anything. Just put one in my C6 race car. Never even taken out of the crate. $5500 plus shipping. pm me if interested as I will not check back here too often. Thanks!
09-27-2011, 06:38 PM
#2011
Advanced
Member Since: Oct 2008
Location: Raleigh NC
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
Parts are from my c5Z06 Harness bar and driver side seat bracket have been previously installed and since removed. Car is sold, parts are collecting dust.
Hardbar USA Harness bar. No damage, scratches or problems. Have the bolts and spacers to mount the bar. Does not require cutting sail panel to install. Has new mount area for stock seatbelt mounting.
Asking $250
Hardbar USA extra clearance kit. This is the bracket that allows the harness bar to be moved a few inches rearward for seat clearance. I'm 5'10" and never used it. Still in original packing. It think it also allows to raise or lower the bar height. I think anyone over 6' would benefit from the extensions to move seat back.
Asking $125
Details on both parts are on the hardbarusa website.
Driver and passenger side Corbeau seat slider brackets. they are the double spring/lock mechanism sliders so both sides of the rails latch into place. I dont know exactly what seats they will fit but they were originally attached to a seat of Corbeau A4's.
Asking $50.00 each
Prices do not include shipping. I can ship parts via UPS. If you send a zip code I can get a quote for shipping.
I can email photos of any item if requested but the bar is wrapped in bubble wrap so it will take a little time to open it.
I can accept paypal or cash.
Located in CT or Long Island for pick up.
Email with any questions.
Hardbar USA Harness bar. No damage, scratches or problems. Have the bolts and spacers to mount the bar. Does not require cutting sail panel to install. Has new mount area for stock seatbelt mounting.
Asking $250
Hardbar USA extra clearance kit. This is the bracket that allows the harness bar to be moved a few inches rearward for seat clearance. I'm 5'10" and never used it. Still in original packing. It think it also allows to raise or lower the bar height. I think anyone over 6' would benefit from the extensions to move seat back.
Asking $125
Details on both parts are on the hardbarusa website.
Driver and passenger side Corbeau seat slider brackets. they are the double spring/lock mechanism sliders so both sides of the rails latch into place. I dont know exactly what seats they will fit but they were originally attached to a seat of Corbeau A4's.
Asking $50.00 each
Prices do not include shipping. I can ship parts via UPS. If you send a zip code I can get a quote for shipping.
I can email photos of any item if requested but the bar is wrapped in bubble wrap so it will take a little time to open it.
I can accept paypal or cash.
Located in CT or Long Island for pick up.
Email with any questions.
09-28-2011, 08:07 PM
#2012
Safety Car
(4) 18x9.5 "wagon" wheels - $300 + shipping
Purchased to run rain tires, but they won't clear my new Wilwood SL6Rs even with spacers.
Stoptech SS front brake hoses - SOLD
2 stock rear caliper assemblies - SOLD
T1 X-pipe - $150 + shipping - SOLD
Purchased to run rain tires, but they won't clear my new Wilwood SL6Rs even with spacers.
Stoptech SS front brake hoses - SOLD
2 stock rear caliper assemblies - SOLD
T1 X-pipe - $150 + shipping - SOLD
09-30-2011, 08:48 AM
#2013
Safety Car
FS: Pfadt Heavy Rate Rear Swaybar
** SOLD**
Adj endlinks are included. Bars have new bushings and new decal.
[IMG]
[/IMG]
[IMG]
[/IMG]
Can get more pics if needed. $320 shipped in US.
Adj endlinks are included. Bars have new bushings and new decal.
[IMG]
[/IMG][IMG]
[/IMG]Can get more pics if needed. $320 shipped in US.
Last edited by waddisme; 10-02-2011 at 07:36 PM.
09-30-2011, 01:46 PM
#2014
Instructor
Member Since: Aug 2006
Location: Pasadena CA
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
C6z06 Parts for Sale
2 Piece Coleman Rotors 3 HPDE events $1200 Would like to sell as a set unless 2 members agree to purchase and split.
Quantum Brake Duct Kit $100
Oil Catch Can $75
Lingenfelter Large Capacity Oil Tank for Dry Sump $220
Pfadt Roll Bar $680 w/ hardware from Pfadt
Hoosier R6 in Stock Z06 Sizes $600 OBO Rear has plenty of meat leaft, front passenger side is coording due to not enough neg camber in alignment.
Vetteworks Harness Anchor $85
email or text me so I can keep track of who needs what
fabian.lacey@gmail.com -626.379.9949
Thanks guys
Quantum Brake Duct Kit $100
Oil Catch Can $75
Lingenfelter Large Capacity Oil Tank for Dry Sump $220
Pfadt Roll Bar $680 w/ hardware from Pfadt
Hoosier R6 in Stock Z06 Sizes $600 OBO Rear has plenty of meat leaft, front passenger side is coording due to not enough neg camber in alignment.
Vetteworks Harness Anchor $85
email or text me so I can keep track of who needs what
fabian.lacey@gmail.com -626.379.9949
Thanks guys
09-30-2011, 04:41 PM
#2016
Burning Brakes
Vetteworks Harness Anchor $85
email or text me so I can keep track of who needs what
fabian.lacey@gmail.com -626.379.9949
Thanks guys
email or text me so I can keep track of who needs what
fabian.lacey@gmail.com -626.379.9949
Thanks guys
10-01-2011, 04:48 PM
#2017
Drifting
FS: G-Force 5pt camlock belts
Update 10/2 - sold to doje
Have 2 older sets of black G-Force 5pt camlock belts for sale, both part # 7000BK. Pull down shoulder belts.
Set 1 is used and has been used in by autocross car, some wear on shoulder belt edges from readjusting belts between runs, expiration date of 2008, was bought sometime in 2003. Asking $45 shipped obo.
Set 2 was bought in 2008 to replace the above set, but was forgotten about and never installed, still new in box. expiration date of 2013. Asking $80 shipped obo. Both sets together for $110 obo.
Set 1:
Set 2:
Have 2 older sets of black G-Force 5pt camlock belts for sale, both part # 7000BK. Pull down shoulder belts.
Set 1 is used and has been used in by autocross car, some wear on shoulder belt edges from readjusting belts between runs, expiration date of 2008, was bought sometime in 2003. Asking $45 shipped obo.
Set 2 was bought in 2008 to replace the above set, but was forgotten about and never installed, still new in box. expiration date of 2013. Asking $80 shipped obo. Both sets together for $110 obo.
Set 1:
Set 2:
Last edited by shotchkiss; 10-02-2011 at 10:45 PM. Reason: sold
10-02-2011, 10:15 PM
#2019
Race Director
Have 2 older sets of black G-Force 5pt camlock belts for sale, both part # 7000BK. Pull down shoulder belts.
Set 1 is used and has been used in by autocross car, some wear on shoulder belt edges from readjusting belts between runs, expiration date of 2008, was bought sometime in 2003. Asking $45 shipped obo.
Set 2 was bought in 2008 to replace the above set, but was forgotten about and never installed, still new in box. expiration date of 2013. Asking $80 shipped obo. Both sets together for $110 obo.
Set 1:
Set 2:
Set 1 is used and has been used in by autocross car, some wear on shoulder belt edges from readjusting belts between runs, expiration date of 2008, was bought sometime in 2003. Asking $45 shipped obo.
Set 2 was bought in 2008 to replace the above set, but was forgotten about and never installed, still new in box. expiration date of 2013. Asking $80 shipped obo. Both sets together for $110 obo.
Set 1:
Set 2:
10-03-2011, 01:23 AM
#2020
Le Mans Master
FS: RJS 5-Way Harnesses (2)
Sold!!! 
For sale: Pair of RJS 5-way racing harnesses in red. Brand new. Dated June, 09.
Was going to use them in my Nova, but I'm switching to black.
Have PayPal or Postal money order OK. $100.00 shipped for pair, or $50.00 shipped ea. (US)
For sale in C4 Parts section, too.
Sold!!!
For sale: Pair of RJS 5-way racing harnesses in red. Brand new. Dated June, 09.
Was going to use them in my Nova, but I'm switching to black.
Have PayPal or Postal money order OK. $100.00 shipped for pair, or $50.00 shipped ea. (US)
For sale in C4 Parts section, too.
Sold!!!
Last edited by johnnymo63; 10-05-2011 at 02:19 PM. Reason: sold