Post your Race Parts 4 Sale HERE
#3061
ls7 warhawk heads.
For sale almost Brand New set of World Products Warhawk ls7x 64cc heads with complete valves and springs.. 12Deg # 025350-2 Ser# 8832
These head were on a new turbo build motor that My Partner had sent to build.. they have 2-3 short dyno pulls made 1200 hp.. on the 3 or 4 pull the motor fell off to around 800 hp.. when he started to check why they found that in one of the heads the rocker stud had pulled out.. do to the incorrect push rod.... it can easily fixed with heli coil ... the heads will work on any ls7 and make real power..
the car has been sold with stock heads and he has given me these heads to sell them for him.
I also have a set of Harland Sharp rockers for sale. with one of them that need to be repaired .. same amount of time on them ..like new 3- pulls on the dyno,, $ 300.00 shipped
package deal $1600.00 obo reduced price
Manny 305-333-4445
These head were on a new turbo build motor that My Partner had sent to build.. they have 2-3 short dyno pulls made 1200 hp.. on the 3 or 4 pull the motor fell off to around 800 hp.. when he started to check why they found that in one of the heads the rocker stud had pulled out.. do to the incorrect push rod.... it can easily fixed with heli coil ... the heads will work on any ls7 and make real power..
the car has been sold with stock heads and he has given me these heads to sell them for him.
I also have a set of Harland Sharp rockers for sale. with one of them that need to be repaired .. same amount of time on them ..like new 3- pulls on the dyno,, $ 300.00 shipped
package deal $1600.00 obo reduced price
Manny 305-333-4445
#3062
Racer
FS: Chasecam Dual Camera System with Data Aq
Pulled from my T-1 Car. This will record two separate standard definition feeds, GPS, RPM & Speed onto a single card. System will also auto record when starting and stopping or you can use the remote button (very handy). Comes with everything shown including two 1-GB CF cards, mounting boxes and roll bar mounts.
$Sold
Best method of contact email or PM.
PDR100 Solid State Video Recorder
SS1000DX Dual Video Processor
DM10 Data Module
GPS Antenna
RPM Pickup
Remote Start/Stop button
2 SD Bullet Cameras
Box Mounts
Camera Roll Bar Mounts
Misc Suction Cup Mounts
Over $2000 MSRP
$Sold
Best method of contact email or PM.
PDR100 Solid State Video Recorder
SS1000DX Dual Video Processor
DM10 Data Module
GPS Antenna
RPM Pickup
Remote Start/Stop button
2 SD Bullet Cameras
Box Mounts
Camera Roll Bar Mounts
Misc Suction Cup Mounts
Over $2000 MSRP
Last edited by jimtway; 01-22-2013 at 06:26 PM.
#3063
Racer
Pulled from my T-1 Car. This will record two separate standard definition feeds, GPS, RPM & Speed onto a single card. System will also auto record when starting and stopping or you can use the remote button (very handy). Comes with everything shown including two 1-GB CF cards, mounting boxes and roll bar mounts.
$800
Best method of contact email or PM.
PDR100 Solid State Video Recorder
SS1000DX Dual Video Processor
DM10 Data Module
GPS Antenna
RPM Pickup
Remote Start/Stop button
2 SD Bullet Cameras
Box Mounts
Camera Roll Bar Mounts
Misc Suction Cup Mounts
Over $2000 MSRP
$800
Best method of contact email or PM.
PDR100 Solid State Video Recorder
SS1000DX Dual Video Processor
DM10 Data Module
GPS Antenna
RPM Pickup
Remote Start/Stop button
2 SD Bullet Cameras
Box Mounts
Camera Roll Bar Mounts
Misc Suction Cup Mounts
Over $2000 MSRP
#3064
Race Director
The Unicorn of C5 parts... Corsa Ti!
I am selling my Corsa Competition Titanium C5 exhaust. Corsa stopped making these after a short run due to manufacturing costs. This is hands down the best aftermarket exhaust ever made for a C5 and incredibly rare. I couldn't find another 1 for sale with the mufflers within the last 2 years. If I missed 1 somewhere, feel free to point it out.
These retailed for over $2k new.
Asking SOLD.
Last edited by RedLS1GTO; 01-28-2013 at 08:09 AM.
#3066
Racer
pulled from my t-1 car. This will record two separate standard definition feeds, gps, rpm & speed onto a single card. System will also auto record when starting and stopping or you can use the remote button (very handy). Comes with everything shown including two 1-gb cf cards, mounting boxes and roll bar mounts.
$sold
best method of contact email or pm.
Pdr100 solid state video recorder
ss1000dx dual video processor
dm10 data module
gps antenna
rpm pickup
remote start/stop button
2 sd bullet cameras
box mounts
camera roll bar mounts
misc suction cup mounts
over $2000 msrp
$sold
best method of contact email or pm.
Pdr100 solid state video recorder
ss1000dx dual video processor
dm10 data module
gps antenna
rpm pickup
remote start/stop button
2 sd bullet cameras
box mounts
camera roll bar mounts
misc suction cup mounts
over $2000 msrp
#3067
Pro
Wheels and tires
4 17 inch stock Z06 wheels with 5 heat cycle 245x40x17 A6's - $550 as mounted. Wheels only - $400, tires only $200. 1 heat cycle was 40 minute race. Other 4 were TT or qualifying.
4 18 inch stock base C5 wheels with 245 Hoosier Wets. 2 races on 2 tires and 1 race on 2 tires (qualifier). $400 as mounted, or $200 for wheels only and $200 for tires only.
Charlotte, NC area pick-up or delivery, or I can deliver to NASA VIR event 2/15.
4 18 inch stock base C5 wheels with 245 Hoosier Wets. 2 races on 2 tires and 1 race on 2 tires (qualifier). $400 as mounted, or $200 for wheels only and $200 for tires only.
Charlotte, NC area pick-up or delivery, or I can deliver to NASA VIR event 2/15.
#3069
Instructor
Member Since: Apr 2008
Location: Centreville VA
Posts: 163
Likes: 0
Received 0 Likes
on
0 Posts
PFC 99 Front Pads
For sale, PFC99 pads for C5 Base/Z51/Z06 and C6 Base/Z51:
*** 1 set BNIB PFC99's is sold to 383!
2 Brand new in the box, front sets of PFC99 pads for sale, $100 per set, shipped:
I also have 1 front set of lightly used PFC99's, $75 shipped:
*** 1 set BNIB PFC99's is sold to 383!
2 Brand new in the box, front sets of PFC99 pads for sale, $100 per set, shipped:
I also have 1 front set of lightly used PFC99's, $75 shipped:
Last edited by VTME13; 01-24-2013 at 09:23 PM. Reason: sold 1 set to 383
#3071
Le Mans Master
#3073
Drifting
FS: Pfadt Sway Bars
FS: Pfadt sway bars
Front - Comp or Heavy with arms
(approx. 3 years old)
Rear - Comp or Heavy with arms and pillow blocks
(approx. 4 years old)
These are spare sway bars I have had taking up space in garage.
Cost new is approx. $1500 with pillow blocks
$525 plus shipping
http://s1145.photobucket.com/albums/...t=IMGP2984.jpg
SOLD
Front - Comp or Heavy with arms
(approx. 3 years old)
Rear - Comp or Heavy with arms and pillow blocks
(approx. 4 years old)
These are spare sway bars I have had taking up space in garage.
Cost new is approx. $1500 with pillow blocks
$525 plus shipping
http://s1145.photobucket.com/albums/...t=IMGP2984.jpg
SOLD
Last edited by J.R.; 01-26-2013 at 10:42 AM. Reason: Item sold
#3074
Pro
FS: Sharkbar harness bar for C6
Sharkbar harness bar for C6. Includes mounting brackets, templates for cutting holes in sail panels, and grommets for holes.
The brackets have a bedliner type finish (will not be visible after installation), while the bar itself is smooth black.
$320 shipped.
I purchased it from Bowchickawowow back in December and have decided not to put it in the car. Here is a link to his old listing.
http://forums.corvetteforum.com/c6-p...ar-for-c6.html
The brackets have a bedliner type finish (will not be visible after installation), while the bar itself is smooth black.
$320 shipped.
I purchased it from Bowchickawowow back in December and have decided not to put it in the car. Here is a link to his old listing.
http://forums.corvetteforum.com/c6-p...ar-for-c6.html
#3075
Track Junky
FS: Pfadt sway bars
Front - Comp or Heavy with arms
(approx. 3 years old)
Rear - Comp or Heavy with arms and pillow blocks
(approx. 4 years old)
These are spare sway bars I have had taking up space in garage.
Cost new is approx. $1500 with pillow blocks
$525 plus shipping
http://s1145.photobucket.com/albums/...t=IMGP2984.jpg
Front - Comp or Heavy with arms
(approx. 3 years old)
Rear - Comp or Heavy with arms and pillow blocks
(approx. 4 years old)
These are spare sway bars I have had taking up space in garage.
Cost new is approx. $1500 with pillow blocks
$525 plus shipping
http://s1145.photobucket.com/albums/...t=IMGP2984.jpg
#3077
Pro
#3078
Drifting
Originally Posted by J.R. View Post
FS: Pfadt sway bars
Front - Comp or Heavy with arms
(approx. 3 years old)
Rear - Comp or Heavy with arms and pillow blocks
(approx. 4 years old)
These are spare sway bars I have had taking up space in garage.
Cost new is approx. $1500 with pillow blocks
$525 plus shipping
http://s1145.photobucket.com/albums/...t=IMGP2984.jpg
By taken19
Does another set of pillow blocks need to be purchased for the front sway bar? And is the ride too harsh for the street? My car is about 80-90% track now but the wife still likes a date night once in a while.
You will need pillow blocks for front bar and both sets of end links.
For combination track/street I would start will full soft front and rear.
With a heavy or comp, whether it will be a little stiff, also depends on spring rate.
FS: Pfadt sway bars
Front - Comp or Heavy with arms
(approx. 3 years old)
Rear - Comp or Heavy with arms and pillow blocks
(approx. 4 years old)
These are spare sway bars I have had taking up space in garage.
Cost new is approx. $1500 with pillow blocks
$525 plus shipping
http://s1145.photobucket.com/albums/...t=IMGP2984.jpg
By taken19
Does another set of pillow blocks need to be purchased for the front sway bar? And is the ride too harsh for the street? My car is about 80-90% track now but the wife still likes a date night once in a while.
You will need pillow blocks for front bar and both sets of end links.
For combination track/street I would start will full soft front and rear.
With a heavy or comp, whether it will be a little stiff, also depends on spring rate.
#3079
Pm sent
Pm sent
sharkbar harness bar for c6. Includes mounting brackets, templates for cutting holes in sail panels, and grommets for holes.
The brackets have a bedliner type finish (will not be visible after installation), while the bar itself is smooth black.
$320 shipped.
I purchased it from bowchickawowow back in december and have decided not to put it in the car. Here is a link to his old listing.
http://forums.corvetteforum.com/c6-p...ar-for-c6.html
The brackets have a bedliner type finish (will not be visible after installation), while the bar itself is smooth black.
$320 shipped.
I purchased it from bowchickawowow back in december and have decided not to put it in the car. Here is a link to his old listing.
http://forums.corvetteforum.com/c6-p...ar-for-c6.html
#3080
WTB DRM Bilsteins / camber kit
Just like the title says I'm looking for DRM Bilsteins and a camber kit for a C6 base Z51 Maybe some T1 bars too. How much do the T1's go for around here?
Thanks
Chris
Thanks
Chris
Last edited by 383; 01-25-2013 at 07:37 PM.