Source for used slicks???
#1
Melting Slicks
Thread Starter
Source for used slicks???
Guys, I know there are a few places to sell warm-up take-offs for various platforms, but I can't seem to find any of them online... Looking for some used slicks to run over the second half of the season...
Mike
Mike
#5
Premium Supporting Vendor
Member Since: Oct 2001
Location: Dallas Tx
Posts: 8,392
Received 571 Likes
on
292 Posts
St. Jude Vendor Donor '03-'04-'05-'06-'07-'08-'09-'10-'11
check with LG Motorsports
LG
LG
__________________
LG Pro LT Headers, MOST HP, MOST TORQUE
http://lgmotorsports.com/gallery/alb...no_compare.jpg
LGM http://www.LGMotorsports.com
Winner Daytona 250
22 WC Wins
"Most powerful Corvette headers on the planet"
LG Pro LT Headers, MOST HP, MOST TORQUE
http://lgmotorsports.com/gallery/alb...no_compare.jpg
LGM http://www.LGMotorsports.com
Winner Daytona 250
22 WC Wins
"Most powerful Corvette headers on the planet"
#7
Melting Slicks
I used John Berget. 262-740-0180. Got a set of RA1 scrubs for $440 shipped. I got 3 full days (5 - 25 minutes sessions each day) out of the fronts and there's probably still another day in the rears. I run them on C5Z 10x8.5 Speedlines front and rear, which are for sale if anyone's interested.
Paul
Paul
#9
Safety Car
Mike needs Porsche sizes, dont forget. Try the Yokos they are great.
Mike I get mine from Bob as well, won a couple of time trials on them.
They are like having some of the fastest heat cycles of R6's for several weekends. And no falling off. I have no reason to ever buy a new R6.
Mike I get mine from Bob as well, won a couple of time trials on them.
They are like having some of the fastest heat cycles of R6's for several weekends. And no falling off. I have no reason to ever buy a new R6.