1963 Resto-mod has begun!
09-20-2016, 07:00 PM
#128
Advanced
Thread Starter
Member Since: Jun 2011
Location: Vancouver British Columbia
Posts: 77
Likes: 0
Received 1 Like
on
1 Post
Phew!
Had to take the car to a new shop (third shop now) to keep this project moving.
Today was a day to celebrate...an amazing milestone.
First time the 675hp motor was fired up! Mufflers sound great.
https://www.facebook.com/1963Corvett...=page_internal
Starting to feel like it is actually going to be finished!
Had to take the car to a new shop (third shop now) to keep this project moving.
Today was a day to celebrate...an amazing milestone.
First time the 675hp motor was fired up! Mufflers sound great.
https://www.facebook.com/1963Corvett...=page_internal
Starting to feel like it is actually going to be finished!
09-20-2016, 09:49 PM
#129
Melting Slicks
Looks Fantastic! What material did you use to form out the door panels?
05-24-2017, 04:32 PM
#132
Advanced
Thread Starter
Member Since: Jun 2011
Location: Vancouver British Columbia
Posts: 77
Likes: 0
Received 1 Like
on
1 Post
Phew!
Had to take the car to a new shop (third shop now) to keep this project moving.
Today was a day to celebrate...an amazing milestone.
First time the 675hp motor was fired up! Mufflers sound great.
https://www.facebook.com/1963Corvett...=page_internal
Starting to feel like it is actually going to be finished!
Had to take the car to a new shop (third shop now) to keep this project moving.
Today was a day to celebrate...an amazing milestone.
First time the 675hp motor was fired up! Mufflers sound great.
https://www.facebook.com/1963Corvett...=page_internal
Starting to feel like it is actually going to be finished!
The following users liked this post:
RJ1 (05-24-2017)
05-24-2017, 10:43 PM
#135
Racer
Great looking car!
05-24-2017, 11:36 PM
#137
Safety Car
Super nice!
05-25-2017, 12:12 AM
#138
Race Director
Sinister and imposing in a very well executed way. 
05-25-2017, 10:41 AM
#139
Racer
05-25-2017, 05:53 PM
#140
Advanced
Thread Starter
Member Since: Jun 2011
Location: Vancouver British Columbia
Posts: 77
Likes: 0
Received 1 Like
on
1 Post
I can't remember now...I bought them so long ago... 
They used to have harness holes in them that I filled in, the shoulder wings were also cut down slightly...there is now a left and a right.
they were stripped down and re-upholstered. I bought the thinnest ones I could find (within reason) to attempt to get the most leg room possible...and it is still tight.
They used to have harness holes in them that I filled in, the shoulder wings were also cut down slightly...there is now a left and a right.
they were stripped down and re-upholstered. I bought the thinnest ones I could find (within reason) to attempt to get the most leg room possible...and it is still tight.