[C2] 64 Oil Line Underhood Routing
#1
Safety Car
Thread Starter
64 Oil Line Underhood Routing
Anyone can post a picture or other detail showing the routing from the firewall to the engine block for the oil line?
Second, is there a fitting required between the block and tube fitting? How tall would it be? I know the radio shield must be worked around.
Second, is there a fitting required between the block and tube fitting? How tall would it be? I know the radio shield must be worked around.
#2
Safety Car
Member Since: Apr 2000
Location: New York New York
Posts: 4,837
Received 1,140 Likes
on
556 Posts
2023 C2 of the Year Finalist - Unmodified
2023 C1 of the Year Finalist - Unmodified
Here is the best pic I have for the oil line on my 64 FI.
Here are the two fittings for the block, the large one goes into the block and the smaller one goes on the oil line.
Joe
Here are the two fittings for the block, the large one goes into the block and the smaller one goes on the oil line.
Joe
#4
Safety Car
Thread Starter
Removed that fitting 50 years ago, before cataloging removed parts, and found it in the first place I looked.
Considering a lotto ticker today .
Anyone else got pictures not fullie? Mine is 365 horse.
Considering a lotto ticker today .
Anyone else got pictures not fullie? Mine is 365 horse.
The following 2 users liked this post by pop23235:
Calistoga C2 (Yesterday),
hcallaway (05-17-2024)