stupid bumper removal question
Thread Starter
Melting Slicks
Joined: Dec 2000
Posts: 2,130
Likes: 1
From: mesa,az
stupid bumper removal question
i must be missing something simple here. trying to remove the front bumper on my 75. anyway i look at it i have to remove the row of screws that attach the facia to the body on the top run. problem is i can't figure how to get to them.removing the buckets don't look like it will give me access. can't see a way at them from underneath. what am i not seeing here.
thanks
greg
thanks
greg
Race Director
Joined: Nov 2000
Posts: 11,872
Likes: 12
From: Waterloo ontario Canada
There are some really hard to get at bolts in the 75 front pumper. I removed and replaced mine a few times and the ones in the upper corners are impossible to even see so you bend your arm around and tighten the nuts, they break off easy this way. Later is drilled out all the broken studs and installed new 10 x 32 brass screws and soldered them to the original strips.
I found it doable but a pain.
I found it doable but a pain.
