another swap meet part painted
Thread Starter
Drifting
Joined: Nov 2005
Posts: 1,795
Likes: 1
another swap meet part painted
forgot to grab the camera for the whole job but its just like the valve covers with primer, high heat silver ,high heat blue then the high heat clear.
tell me what you think of the timing pointer. after stripping and scrubbing it down i decided to tape off half of the pointer and leave it bare metal so i can see the marks
then untaped before clear coating the cover so it is protected.
tell me what you think of the timing pointer. after stripping and scrubbing it down i decided to tape off half of the pointer and leave it bare metal so i can see the marks
then untaped before clear coating the cover so it is protected.
Racer
Joined: Oct 2005
Posts: 427
Likes: 0
From: Cary Illinois
Looking good 
You could get really creative and tape off the timing marks and hit them with a reflective paint. I used one of those silver paint markers on mine and they light up like crazy when the timing light pulses.
You could get really creative and tape off the timing marks and hit them with a reflective paint. I used one of those silver paint markers on mine and they light up like crazy when the timing light pulses.
Thread Starter
Drifting
Joined: Nov 2005
Posts: 1,795
Likes: 1
Originally Posted by Q's 68
Looking good
You could get really creative and tape off the timing marks and hit them with a reflective paint. I used one of those silver paint markers on mine and they light up like crazy when the timing light pulses.
You could get really creative and tape off the timing marks and hit them with a reflective paint. I used one of those silver paint markers on mine and they light up like crazy when the timing light pulses.
