New Dash ???
Thread Starter
Instructor
Joined: Sep 2006
Posts: 100
Likes: 0
From: MISSOULA MONTANA
New Dash ???
Since Every One Seems To Agree That The Replacement Dash's That Are Avaiable Out There Are Not Of Very Good Quality.
Does Anyone Have A Recommendation On What To Do??
Does Anyone Have A Recommendation On What To Do??
Drifting
Joined: Jan 2006
Posts: 1,944
Likes: 22
From: Yooperville MI
I haven't needed to replace a C3 pad yet but one alternative is Just Dashes in Arizona. http://www.justdashes.com/Index.htm
They will replace the foam and remold new vinyl to your existing foundation so if your pad is original GM, you know it will fit when you get it back.
They will replace the foam and remold new vinyl to your existing foundation so if your pad is original GM, you know it will fit when you get it back.
Melting Slicks
Joined: Jun 2005
Posts: 2,938
Likes: 2
From: Arkansas
Originally Posted by ahoover
I haven't needed to replace a C3 pad yet but one alternative is Just Dashes in Arizona. http://www.justdashes.com/Index.htm
They will replace the foam and remold new vinyl to your existing foundation so if your pad is original GM, you know it will fit when you get it back.
They will replace the foam and remold new vinyl to your existing foundation so if your pad is original GM, you know it will fit when you get it back.
I couldn't get them to email me back on one for my 82....I heard from other members they aren't doing C3's anymore.
I have had both dashes from Corvette america and all knoch....both are similar in quality ( not as good as original, but will get you by)
The Al noch dash cost me quite a bit less.....thats the one thats in my car right now
Drifting
Joined: Jan 2006
Posts: 1,944
Likes: 22
From: Yooperville MI
Originally Posted by 1982CorvetteDude
I couldn't get them to email me back on one for my 82...
Melting Slicks
Joined: Jun 2005
Posts: 2,938
Likes: 2
From: Arkansas
Originally Posted by Prestige593
Has anyone bought a dash from Willcox Corvette? I will be replacing mine and wondered if theirs is a good product. They have it listed pretty reasonable.
Thats where my first one came from....it's a corvette america brand. They were actually cheaper than corvette america but I haven't had the best of luck with thier (wilcox) customer service. I sold that dash on ebay and bought the al noch version.....it was $80 cheaper than my first one bought from Wilcox.
Le Mans Master
Joined: Mar 2001
Posts: 6,640
Likes: 287
From: Ann Arbor Michigan
Originally Posted by SPIKESDAD
Since Every One Seems To Agree That The Replacement Dash's That Are Avaiable Out There Are Not Of Very Good Quality.
Does Anyone Have A Recommendation On What To Do??
Does Anyone Have A Recommendation On What To Do??
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
