starter numbers
Thread Starter
CF Community Team
Joined: Mar 2007
Posts: 9,285
Likes: 356
From: Delaware
St. Jude Donor '25
starter numbers
I have a chance to pick up a starter for my car, (right date code /p/n) however the numbers on the starter look a little funny. The p/n is 1108361 and the "361" part looks a little different, almost like it was stamped at a different time. Was this the case, that the last 3 digits were stamped later, to differentiate a certain unit? Does anyone have pics of the numbers on a similar 68 starter to compare? I just don't want to spend the $$ on a restamp. Thanks John
Racer
Joined: Apr 2007
Posts: 374
Likes: 0
From: Little Neck NY
1968 Corvette Delco-Remy Starter Motors:
1107365 All 427 Engines (except L88)
1108338 327 Engines with Turbo Hydra-Matic Transmission
1108351 Early Production L88 with M22 Heavy-Duty 4-Speed Transmission
1108361 327 Engines with Manual Transmission
1108400 2nd Production L88 with M22 Heavy-Duty 4-Speed Transmission
Sorry no PIC's.
1107365 All 427 Engines (except L88)
1108338 327 Engines with Turbo Hydra-Matic Transmission
1108351 Early Production L88 with M22 Heavy-Duty 4-Speed Transmission
1108361 327 Engines with Manual Transmission
1108400 2nd Production L88 with M22 Heavy-Duty 4-Speed Transmission
Sorry no PIC's.
Melting Slicks
Joined: Apr 1999
Posts: 2,675
Likes: 13
From: Sudbury MA
1108361 is in my 68 coupe L79 with 4 speed and is correct for this car.
My digits were all the same but it should be easy to tell if yours are altered. Most likely the one you are looking at is the real deal, provided your 68 is a small block with 4 speed.
Kurt
My digits were all the same but it should be easy to tell if yours are altered. Most likely the one you are looking at is the real deal, provided your 68 is a small block with 4 speed.
Kurt
Melting Slicks
Joined: Apr 1999
Posts: 2,675
Likes: 13
From: Sudbury MA
If you want to buy it once, have it be correct and work better than when it wa snew, get the correct rebuilt starter from John Pirkle.
No more heat soak problems, no more slow start.
Spins it over like greased lightning and is all factory original with correct numbers and appearance.
He beefs up the guts inside to make it a heavy duty that would spin over the Titanic.
I had all kinds of problems until I had John rebuild my factory correct 68 1108361. Even sounds awesome when it turns the engine over.
Worth every penny
Kurt
No more heat soak problems, no more slow start.
Spins it over like greased lightning and is all factory original with correct numbers and appearance.
He beefs up the guts inside to make it a heavy duty that would spin over the Titanic.
I had all kinds of problems until I had John rebuild my factory correct 68 1108361. Even sounds awesome when it turns the engine over.
Worth every penny
Kurt
Thread Starter
CF Community Team
Joined: Mar 2007
Posts: 9,285
Likes: 356
From: Delaware
St. Jude Donor '25
If you want to buy it once, have it be correct and work better than when it wa snew, get the correct rebuilt starter from John Pirkle.
No more heat soak problems, no more slow start.
Spins it over like greased lightning and is all factory original with correct numbers and appearance.
He beefs up the guts inside to make it a heavy duty that would spin over the Titanic.
I had all kinds of problems until I had John rebuild my factory correct 68 1108361. Even sounds awesome when it turns the engine over.
Worth every penny
Kurt
No more heat soak problems, no more slow start.
Spins it over like greased lightning and is all factory original with correct numbers and appearance.
He beefs up the guts inside to make it a heavy duty that would spin over the Titanic.
I had all kinds of problems until I had John rebuild my factory correct 68 1108361. Even sounds awesome when it turns the engine over.
Worth every penny
Kurt
Thread Starter
CF Community Team
Joined: Mar 2007
Posts: 9,285
Likes: 356
From: Delaware
St. Jude Donor '25
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
2027 Corvette vs The World: Every C8 vs Its Closest Competitor
Joe Kucinski
10 Most Common Corvette Problems of the Last 20 Years!
Joe Kucinski
5 MOST and 5 LEAST Popular Corvette Model Years in History!
Joe Kucinski
2027 Corvette Buyer's Guide: Everything You Need to Know!
Joe Kucinski
Melting Slicks
Joined: Apr 1999
Posts: 2,675
Likes: 13
From: Sudbury MA
Avalonjohn,
John Pirkle 706-860-9047 pirklesr@aol.com
His starters are not cheap but you will likely never need to replace it again.
Also, hard to describe, but when you hear one of his starters with the high torque guts turn a car over, it is so solid and reassuring that you know it could turn over an airplane engine.
It sounds like a very solid turbine and the car starts immediately on the first turn. Awesome.
I have never experienced anything like it. Very solid and quality , hard to describe.
I also had my alternator rebuilt and my voltage regulator and both pieces are show room quality and function excellent. Almost seems a shame to put them in a car.
His reputation is well deserved, and he is highly recommended.
Good luck, you will be very happy.
Kurt
John Pirkle 706-860-9047 pirklesr@aol.com
His starters are not cheap but you will likely never need to replace it again.
Also, hard to describe, but when you hear one of his starters with the high torque guts turn a car over, it is so solid and reassuring that you know it could turn over an airplane engine.
It sounds like a very solid turbine and the car starts immediately on the first turn. Awesome.
I have never experienced anything like it. Very solid and quality , hard to describe.
I also had my alternator rebuilt and my voltage regulator and both pieces are show room quality and function excellent. Almost seems a shame to put them in a car.
His reputation is well deserved, and he is highly recommended.
Good luck, you will be very happy.
Kurt
