door panel instalation help, quick!
Thread Starter
Safety Car
Joined: Nov 2006
Posts: 4,449
Likes: 0
door panel instalation help, quick!
could someone show me how to attach my door pulls? does it go into the panel itself or go through into the door? wut kund of screw was used? and it there any way to attach the door panel without the screw in the top of the door panel for all to see? AND one more, when i took my panel off i didnt see the plastic water barrier, is it behind the metal pice seperating the window from the panel?
Miles
Miles
Melting Slicks
Joined: May 2007
Posts: 3,246
Likes: 4
From: Bay Area CA
could someone show me how to attach my door pulls? does it go into the panel itself or go through into the door? wut kund of screw was used? and it there any way to attach the door panel without the screw in the top of the door panel for all to see? AND one more, when i took my panel off i didnt see the plastic water barrier, is it behind the metal pice seperating the window from the panel?
Miles
Miles
Team Owner
Joined: Jan 2006
Posts: 37,637
Likes: 3,118
From: Crossville TN
You only need the vapor barrier in the door if you are planning on driving it in the rain, using an automatic car wash, or aiming your garden hose at the bottom of the door glass when you wash it yourself. Is was meant to keep water off of the door panels [inside surface]. Most C3's have lost the original clear polyethelene (???) sheeting long ago. You can make one out of a painter's drop cloth [poly sheeting] and some non-hardening caulk to run around the outside edge to hold it in place.
