Custom Fuel Door Installed !!!
Thread Starter
Team Owner
Joined: Aug 2006
Posts: 24,125
Likes: 15
From: Columbia Missouri
Custom Fuel Door Installed !!!
I know it's a small step taken, but those of you that will remember the last thread didn't get to see it installed. Yes...the paint sucks, but you cans see how the new fuel door takes the place of the original to use the stock hinge and ring. I really like the way it looks, and I wanted to see how the new fill-through gas cap looked under it. It was a sealed cap that I vented with three tiny tiny tiny holes.
Thread Starter
Team Owner
Joined: Aug 2006
Posts: 24,125
Likes: 15
From: Columbia Missouri
What gasket? It's just the two rubber bump stops, and the drip guard and drain.
I would market them if the whole thing didn't cost me around $150 including parts, labor, and shipping.
Burning Brakes
Joined: Jun 2006
Posts: 1,249
Likes: 13
From: San Angelo TX
I really like the job you did.
However, I would have rather seen you not put the new style cross-flags on it. I'd rather see the C2/C3 style.
Also why is it backwards? The checkered part is supposed to be on the left on the new style.
Sorry to be negative on your nice job.
However, I would have rather seen you not put the new style cross-flags on it. I'd rather see the C2/C3 style.
Also why is it backwards? The checkered part is supposed to be on the left on the new style.
Sorry to be negative on your nice job.
Last edited by roger55; Mar 6, 2008 at 07:18 PM.
Thread Starter
Team Owner
Joined: Aug 2006
Posts: 24,125
Likes: 15
From: Columbia Missouri
I really like the job you did.
However, I would have rather seen you not put the new style cross-flags on it. I'd rather see the C2/C3 style.
Also why is it backwards? The checkered part is supposed to be on the left on the new style.
Sorry to be negative on your nice job.
However, I would have rather seen you not put the new style cross-flags on it. I'd rather see the C2/C3 style.
Also why is it backwards? The checkered part is supposed to be on the left on the new style.
Sorry to be negative on your nice job.
I didn't use the new flag. I used the '77 flag. It's not backwards for that flag.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
5 Best & 5 Worst Corvette Daily Drivers
Joe Kucinski
The Headlights of Every Corvette Generation Explained
Joe Kucinski
5 Best & 5 Most Overrated Corvette Track Packages of All Time!
Joe Kucinski
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
Thread Starter
Team Owner
Joined: Aug 2006
Posts: 24,125
Likes: 15
From: Columbia Missouri
I don't have the actual CAD file used by the etcher, but I have screen copies of it. I might be able to get it, but he did the design and technically owns it.
Thread Starter
Team Owner
Joined: Aug 2006
Posts: 24,125
Likes: 15
From: Columbia Missouri
Race Director
Joined: Apr 2007
Posts: 14,062
Likes: 602
From: Henderson Nv-Rohnert Park/Sonoma C o. ca/born in NY Rockaway Beach.
Matt, I really like the gas door. Sure looks hot.. I would be interested int he screen copie to. I have a CNC shop that I deliver to and I have kinda the same idea for a door with a few changes.. Hope its ok... Man thats going to look killer when its done....
G
G
Melting Slicks
Joined: Jun 2003
Posts: 2,802
Likes: 241
From: Niles, MI
I would gladly pay over $200 for one!! They are really boss! DB, you are going to have the most bitchin' Vette on the forum!!! Please say you will be making more!!!!