When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
It's a Perrenti....
Australian Made Corvette Clone on a 1 ton Holden Chassis.
Steering wheel is on the right and it has NSW rego plates.
Oh and I believe it is a four seater.
Haven't actually seen one in the flesh but know they are out there.......
I thought he was joking.So its much larger than a vette?
Not much larger, the Holden 1 tonner (early 70's) was based on a HQ sedan but is it longer than a Vette which is why they put in the rear window.
It has a leaf spring rear end with a 10 bolt live axle. It was designed when C3s were expensive here in Oz so it was a cheap way to get into Vetting
Not much larger, the Holden 1 tonner (early 70's) was based on a HQ sedan but is it longer than a Vette which is why they put in the rear window.
It has a leaf spring rear end with a 10 bolt live axle. It was designed when C3s were expensive here in Oz so it was a cheap way to get into Vetting
Interesting. If the one in the first pic was toned down a little it might not be so bad.A longer wider C3 with a back seat,I bet it could be done and look good.