The guy with the beard is
This is freakin cool
Thread Starter
Drifting
Joined: Jul 2007
Posts: 1,712
Likes: 0
From: Tampa FL
This is freakin cool
Not only is this cool, but I was at the studio one of the days they were filming this and got to watch them cut the car in half. It really does do everything it shows in the commercial. Any of you guys who are chopping cars or just want a kickass saw, this is the one. Kind of pricey compared to other saws but its awesome.
http://www.youtube.com/watch?v=nr7SkiBJI3w
http://www.youtube.com/watch?v=nr7SkiBJI3w
Melting Slicks
Joined: Dec 2007
Posts: 2,619
Likes: 2
From: Perkasie Pa
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
Melting Slicks
Joined: Jun 2005
Posts: 2,239
Likes: 74
From: Palatine, Peoples Republic of Illinois
St. Jude Donor '09-'10-'11-12-'13-'14-'15-'16-'17-‘18
NCM Sinkhole Donor
That's Billy Mays. I think he's the antichrist! You can't buy anything he's not involved with. 
Melting Slicks
Joined: Aug 2005
Posts: 2,821
Likes: 204
From: Lincoln CA
So.......how many easy payments of $39.95 (plus shipping and handling) is the Dual Saw? Will they waive one payment if I order in the next ten minutes?
Actually, when I had a sign company the franchisor recommended a little Makita 9.6v power saw that was a complete waste of money. That counter rotating saw, if it could be run by a reasonable sized inverter, would have been a real blessing on job sites to trim large plastic sign faces for final fit into a cabinet. I wonder why they keep stressing that it can make straight cuts? Isn't that an operator issue? Any power saw can make a straight cut with a proper fence setup or a steady hand.
Billy Mays is the man. I bought one of those "Pops-A-Dent" jobbies from one of his informercials and the damn thing actually works on reasonably shallow dents that don't have severe metal stretching (if the metal is stretched you wind up with bumps where the dents were).
Actually, when I had a sign company the franchisor recommended a little Makita 9.6v power saw that was a complete waste of money. That counter rotating saw, if it could be run by a reasonable sized inverter, would have been a real blessing on job sites to trim large plastic sign faces for final fit into a cabinet. I wonder why they keep stressing that it can make straight cuts? Isn't that an operator issue? Any power saw can make a straight cut with a proper fence setup or a steady hand.
Billy Mays is the man. I bought one of those "Pops-A-Dent" jobbies from one of his informercials and the damn thing actually works on reasonably shallow dents that don't have severe metal stretching (if the metal is stretched you wind up with bumps where the dents were).
Melting Slicks
Joined: Aug 2005
Posts: 2,821
Likes: 204
From: Lincoln CA
We were at the S.F. International Car Show and there was a pitch man there selling ShamWOWs. When we walked up the guy was doing that carpet/coke demo and my son was completely entranced. I had to drag the big guy away. He was reaching for his wallet (which I've never seen happen before when I'm around).
Race Director
Joined: Apr 2000
Posts: 17,676
Likes: 201
From: Who says "Nothing is impossible" ? I've been doing nothing for years.
"Hi Billy Mays here !" Like I'm supposed to know you ? Wtf are you anyway besides an annoying man with too much Just For Men on your beard ? 
Interesting saw though, bet the Chinese have one taken apart already
Interesting saw though, bet the Chinese have one taken apart already