Valve Cover Gaskets

Reply Subscribe

Thread Tools

Search this Thread

Apr 17, 2009 | 03:28 PM

Vette79C3

Thread Starter

Pro

Joined: Jul 2008

Posts: 699

Likes: 3

From: Millersville, MD

Valve Cover Gaskets

Is there any need to use silicone/RTV on these Valve Cover Gaskets when installing? They are the Fel Pro Perma Dry +. I've never used these before.

http://store.summitracing.com/partde...T&autoview=sku

Jeff

Apr 17, 2009 | 04:17 PM

riarms

Drifting

Joined: Feb 2007

Posts: 1,429

Likes: 7

From: Providence Rhode Island

I didnt use any,but i had some leaks but I think it was from the hugh cam I had the motor shook like made and made the bolts loose

Apr 17, 2009 | 04:36 PM

FKING1

Safety Car

Joined: May 2003

Posts: 3,814

Likes: 105

From: Dearborn Heights Michigan

Use them as is with no silicone. Mine haven't leaked.

Apr 17, 2009 | 05:02 PM

7T1vette

Team Owner

Joined: Jan 2006

Posts: 37,637

Likes: 3,116

From: Crossville TN

You don't need any sealant on the Fel-Pro gaskets...but, if you have stamped steel valve covers, you need to flatten out the cover rails, especially around the bolt holes. Those covers get overtorqued and deformed all the time [trying to get them to seal, ironically]. Use a flat strip of metal and a small hammer to flatten the surface {turn the cover upside down with the rail on the metal and use the hammer on the rail bottom-side; that will keep the hammer marks off the top face}.

Reply Subscribe