Speednut kit??
Thread Starter
Safety Car
Joined: Oct 2006
Posts: 3,993
Likes: 9
From: Gig Harbor WA
Speednut kit??
Got the emblem speednut kit from Willcox a while ago, starting to put things together now finally. What are all the 52 speednuts for?? The rear letters came with their own acorn nuts, and the speednuts in the kit dont really seem to fit anything else. Says its for the emblems 70-72.
Thanks!
Thanks!
Drifting
Joined: Jul 2006
Posts: 1,871
Likes: 6
From: Sault Ste. Marie Ontario
I suspect the kit you have is to install all the emblems regardless of whether or not acorn nuts were provided.
I've had to put speed nuts on the Corvette scripts and the hood emblems.
On my 73, acorn nuts are used for the rear corvette letters, hood emblem and gas lid emblem.
Maybe Willcox will join in to elaborate.
If you have any left-overs send them up to me.
I've had to put speed nuts on the Corvette scripts and the hood emblems.
On my 73, acorn nuts are used for the rear corvette letters, hood emblem and gas lid emblem.
Maybe Willcox will join in to elaborate.
If you have any left-overs send them up to me.
Thread Starter
Safety Car
Joined: Oct 2006
Posts: 3,993
Likes: 9
From: Gig Harbor WA
I suspect the kit you have is to install all the emblems regardless of whether or not acorn nuts were provided.
I've had to put speed nuts on the Corvette scripts and the hood emblems.
On my 73, acorn nuts are used for the rear corvette letters, hood emblem and gas lid emblem.
Maybe Willcox will join in to elaborate.
If you have any left-overs send them up to me.
I've had to put speed nuts on the Corvette scripts and the hood emblems.
On my 73, acorn nuts are used for the rear corvette letters, hood emblem and gas lid emblem.
Maybe Willcox will join in to elaborate.
If you have any left-overs send them up to me.
Thanks... My rear letters came with their own acorn nuts. The side STINGRAY emblems have black adhesive on the back, and none of the speednuts in the kit seem to really fit. Eight of the huts are for the marker lights, and I think 2 for the hood emblem. I'm not using my rear door emblem as I bought a lemans racing flip cap. So their will be a few left over I'm sure.
Tommy at WC wasnt much help either (thanks Tommy!!
)Rob
Thread Starter
Safety Car
Joined: Oct 2006
Posts: 3,993
Likes: 9
From: Gig Harbor WA
Thanks again!
Rob
Drifting
Joined: Jul 2006
Posts: 1,871
Likes: 6
From: Sault Ste. Marie Ontario
Ian,
Thanks... My rear letters came with their own acorn nuts. The side STINGRAY emblems have black adhesive on the back, and none of the speednuts in the kit seem to really fit. Eight of the huts are for the marker lights, and I think 2 for the hood emblem. I'm not using my rear door emblem as I bought a lemans racing flip cap. So their will be a few left over I'm sure.
Tommy at WC wasnt much help either (thanks Tommy!!)
Rob
Thanks... My rear letters came with their own acorn nuts. The side STINGRAY emblems have black adhesive on the back, and none of the speednuts in the kit seem to really fit. Eight of the huts are for the marker lights, and I think 2 for the hood emblem. I'm not using my rear door emblem as I bought a lemans racing flip cap. So their will be a few left over I'm sure.
Tommy at WC wasnt much help either (thanks Tommy!!
)Rob
I just tried to stick the emblems on the sides of my fenders and font there is a slight arch in the fender/script that needs to get pulled in with a couple of speed nuts. None of the speed nuts I have fit either so no the frornt of my emblem is sticking out a little.
If you can find a couple of nuts that fit hnag on to them. They might just get you out of a bind.
Ian
Thread Starter
Safety Car
Joined: Oct 2006
Posts: 3,993
Likes: 9
From: Gig Harbor WA
Hi Rob,
I just tried to stick the emblems on the sides of my fenders and font there is a slight arch in the fender/script that needs to get pulled in with a couple of speed nuts. None of the speed nuts I have fit either so no the frornt of my emblem is sticking out a little.
If you can find a couple of nuts that fit hnag on to them. They might just get you out of a bind.
Ian
I just tried to stick the emblems on the sides of my fenders and font there is a slight arch in the fender/script that needs to get pulled in with a couple of speed nuts. None of the speed nuts I have fit either so no the frornt of my emblem is sticking out a little.
If you can find a couple of nuts that fit hnag on to them. They might just get you out of a bind.
Ian
Rob
Racer
Joined: Apr 2007
Posts: 492
Likes: 3
From: Temecula CA
Rob,
I bought that speed nut kit and hardly used any of them. They don't seem to fit anything. As far as your front emblem....I don't want to insult your smarts, but are you sure its a nose emblem and not a gas door emblem? (I know, I know. But I had to ask!) I bought a repop emblem for my nose and it fit perfectly.
Temvette72
I bought that speed nut kit and hardly used any of them. They don't seem to fit anything. As far as your front emblem....I don't want to insult your smarts, but are you sure its a nose emblem and not a gas door emblem? (I know, I know. But I had to ask!) I bought a repop emblem for my nose and it fit perfectly.
Temvette72
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
10 Most Common Corvette Problems of the Last 20 Years!
Joe Kucinski
5 MOST and 5 LEAST Popular Corvette Model Years in History!
Joe Kucinski
2027 Corvette Buyer's Guide: Everything You Need to Know!
Joe Kucinski
10 Things C8 Corvette Owners Hate (But Won't Tell You)
Joe Kucinski
10 Best Corvettes Coming to Barrett-Jackson Palm Beach 2026!
Brett Foote
Every Corvette Grand Sport Explained! (C2, C4, C6, C7, & C8)
Joe Kucinski
Grand Sport & Grand Sport X Launch Alongside All-New 535hp LS6 V8!
Michael S. Palmer
5 Reasons Bad Drivers Crash & 5 Ways to Avoid a Costly Mistake!
Joe Kucinski
7 Bolt-On Upgrades From Extreme Online Store to Level Up Your C6 Corvette
Pouria Savadkouei
Thread Starter
Safety Car
Joined: Oct 2006
Posts: 3,993
Likes: 9
From: Gig Harbor WA
Seriously, I do know the difference, and since I had the hood surround replaced, that may be the problem. Still should fit though. I believe the gas lid emblem has threaded studs on the back, for a nut. I have a new one in the box but decided to go with the lemans style cap contraption.
Thanks anyway, Jerry!
