ac pendulum
Thread Starter
Racer
Joined: Aug 1999
Posts: 341
Likes: 1
From: Levittown Pa
ac pendulum
Ok were can I get a new one?
The one I have is torn in the bend and thats why a lot of people can't either get fresh air or cold ac.
the pendulum is located on the passenger side in the engine bay between the blower motor and the cowl (wiper door).
A pia to get to and remove
The one I have is torn in the bend and thats why a lot of people can't either get fresh air or cold ac.
the pendulum is located on the passenger side in the engine bay between the blower motor and the cowl (wiper door).
A pia to get to and remove
Race Director
Joined: May 2006
Posts: 16,528
Likes: 53
From: Dayton, Ohio
Its a plenum I believe but not sure if I spelled it correctly. You need one for a 71 ?
edit - on second thought the outside piece is the blower motor case or module and the inside piece is the air distributor I think.
edit - on second thought the outside piece is the blower motor case or module and the inside piece is the air distributor I think.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Melting Slicks
Joined: Jan 2003
Posts: 2,877
Likes: 13
From: Doha
St. Jude Donor '08
I just replaced mine with used one I got it off ebay for $35 or something. You need to take off the whole wiper door assembly to be able to reach and get the old one out and install the new one in, its not hard, just a little time consuming, it took me about 3 hours to do including the time to re-align everything.
Pro
Joined: Jul 2004
Posts: 605
Likes: 0
From: Alta Loma CA
Don't anyone laugh. Sorta did a Bubba on it. Mine was torn part way and I put a strip of black duct tape on each side. Cleaned the surface real well first. It has held up for about a year now. It's on my list for long term replacement, but not in the budget yet.
} 
