Beware the plastic storage doors!
Thread Starter
Melting Slicks
Joined: Jun 2009
Posts: 2,343
Likes: 4
From: Anderson SC
Beware the plastic storage doors!
Vendor don't matter, they are all made in the same place. (China?)
Horrible workmanship - doors were WAY too big for the trim frames - bosses for the frame screws almost an inch away from where they need to be etc etc. Took about an hour per door to grind them into something workable. Very **** poor quality - especially for over $20 per door for a piece of injection molded plastic.
-W
Horrible workmanship - doors were WAY too big for the trim frames - bosses for the frame screws almost an inch away from where they need to be etc etc. Took about an hour per door to grind them into something workable. Very **** poor quality - especially for over $20 per door for a piece of injection molded plastic.
-W
