Starter Brace '79
Thread Starter
Heel & Toe
Joined: Jan 2005
Posts: 24
Likes: 0
From: South of Houston Texas
Starter Brace '79
Does anyone have a picture of how this brace is supposed to be mounted? I found it in the glove box. The good news is, we have fixed the ac and the horn - thanks for all your help!
Melting Slicks
Joined: Aug 2005
Posts: 2,359
Likes: 15
From: Confusion
On your starter, the top bolt on the starter (face of the starter below solenoid mounting point-towards front of car) should stick out with a threaded stud. The brace attaches there and the other end bolts to the side of the block. Once you are down there with the brace it's a no brainer. You will probably need the block bolt and the nut and washer for the starter side. GOOD LUCK................
Should look like this:
http://cgi.ebay.com/ebaymotors/66-73...Q5fAccessories
Should look like this:
http://cgi.ebay.com/ebaymotors/66-73...Q5fAccessories
Last edited by corvetteload; Dec 17, 2009 at 12:26 PM.
Thread Starter
Heel & Toe
Joined: Jan 2005
Posts: 24
Likes: 0
From: South of Houston Texas
On your starter, the top bolt on the starter (face of the starter below solenoid mounting point-towards front of car) should stick out with a threaded stud. The brace attaches there and the other end bolts to the side of the block. Once you are down there with the brace it's a no brainer. You will probably need the block bolt and the nut and washer for the starter side. GOOD LUCK................
Should look like this:
http://cgi.ebay.com/ebaymotors/66-73...Q5fAccessories
Should look like this:
http://cgi.ebay.com/ebaymotors/66-73...Q5fAccessories
Thank You!
