carb swap
Melting Slicks
Joined: Oct 2008
Posts: 2,154
Likes: 69
From: Regina Sk Canada
Ok well so far the factory QJ throttle cable bracket will work if you get it lengthened an inch in the middle. local machine shop did mine for $20.00 the holes need to be 5-1/8" center to center. I had to grind down a casting nub at the back of the intake between the rear two bolts to accept the factory kick down bracket. And Edelbrock sells a bracket that bolts to the 1406 carb to accept all the linkage. The bracket part number is 1484. That allows the cruise control to be used. Fuel line you need it a 8126.
