manual window regulators
Thread Starter
Burning Brakes
Joined: Aug 2005
Posts: 801
Likes: 1
manual window regulators
Well I changed out the manual window crank shafts and bushings and the slop is still there.The regulator shaft has a lot of play in it.I cant locate new or rebuilt ones.Where do I go from here?
Burning Brakes
Joined: Apr 2000
Posts: 1,012
Likes: 0
From: Minnesota
Ruger Mag---try Paragon---they used to have a rebuilding service---very hard to find parts for the manual regulator---lots for the power--go figure. I sent mine to Paragon, they did an estimate and they called back for the approval to go ahead or not--took a month or so but they job was very satisfactory--good luck
Thread Starter
Burning Brakes
Joined: Aug 2005
Posts: 801
Likes: 1
Thanks.I never hurd of them till now but it looks like the way to go.Do remember the turn around time on the rebuild?The only problem is they dont list 68 up.only 67 back?
Last edited by rugerm44; May 22, 2010 at 08:57 AM.
Burning Brakes
Joined: Apr 2000
Posts: 1,012
Likes: 0
From: Minnesota
Ruger Man----mine is a 1970 and no problems with their rebuilding--if memory serves me and often it doesn't lately--it took about 6 weeks--of course it could have been the time of year give em a call and inquire--I don't have the number handy as all catalogs are over in the shop with the Vette--somebody here should be able to help--Dave
Thread Starter
Burning Brakes
Joined: Aug 2005
Posts: 801
Likes: 1
They emailed me back again and said they would take a look at them and rebuild them for $120 a side.If there rebuildable.She said around two to three weeks but you know how that gose.Im just tired of the car being down waiting on parts.I would like to drive it some.I guess I could just leave the window glass out and drive it a little that way.I run around with them down most of the time anyway.
