how do i tell if...
Thread Starter
Safety Car
Joined: Sep 2009
Posts: 4,964
Likes: 28
From: Pittsburgh PA
how do i tell if...
these are nos originals? got these from an older gentleman. they were wrapped in newspaper that was dated 1988. they have never been on anything. they do have the dimple marks from the welds. no part number. they are stainless steel
Thread Starter
Safety Car
Joined: Sep 2009
Posts: 4,964
Likes: 28
From: Pittsburgh PA
Race Director
Joined: Jul 2001
Posts: 15,892
Likes: 42
Team Owner
Joined: Sep 2006
Posts: 31,267
Likes: 4,362
From: Westminster Maryland
Hi,
I agree that the SS material is the first indication of aftermarket/ reproduction tips.
Richard Fortier who began Paragon Corvette Reproductions is reproducing 2 tips consistent with the first two variations of 70-73 production line tips. They are very pricey compared to the ss reproductions available, but are a real work of art. They prove that some people can get their reproductions right.
Regards,
Alan
I agree that the SS material is the first indication of aftermarket/ reproduction tips.
Richard Fortier who began Paragon Corvette Reproductions is reproducing 2 tips consistent with the first two variations of 70-73 production line tips. They are very pricey compared to the ss reproductions available, but are a real work of art. They prove that some people can get their reproductions right.
Regards,
Alan
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Racer
Joined: Nov 2008
Posts: 491
Likes: 0
From: Myrtle Beach South Carolina
couldn't find them
Safety Car
Joined: Sep 2005
Posts: 4,062
Likes: 103
From: Southeast, Tennessee
St. Jude Donor '09 thru '26
i can't think off hand of any recent GM part without a part number on it even if it is a label (which would be there if it was NOS)
Team Owner
Joined: Sep 2006
Posts: 31,267
Likes: 4,362
From: Westminster Maryland
Hi U4,
You can buy the tips I described directly from Richard Fortier; and I believe Corvette Central and Ecklers sell them too.
You need to be laying down when you see the price.
Regards,
Ala
You can buy the tips I described directly from Richard Fortier; and I believe Corvette Central and Ecklers sell them too.
You need to be laying down when you see the price.
Regards,
Ala
Last edited by Alan 71; Jan 12, 2011 at 03:20 PM.
Instructor
Joined: Sep 2010
Posts: 228
Likes: 0
From: McKinney Texas
NCRS doesn't show part #s on the exhaust tips for 73/74 they say later designs have spot welds on the rectagular portion and/or part numbers. Neither of these features is correct for prodution line installation