Rear vibration 71 refurb
Thread Starter
Intermediate
Joined: Jul 2004
Posts: 33
Likes: 1
Rear vibration 71 refurb
Redid the whole car back a few years and when approaching 60 to 70 mph the back end virates. thought it was my old tires from 1980 and replaced them but did not resolve. Moved the original rally wheels around and that did nothing...............
I replaced ny original 3.36 rear end with a 3.55 out of a vette from the 80's...............could this possibly cause vibration at highway speeds?
Any suggestions to resolve would be appreciated.
I replaced ny original 3.36 rear end with a 3.55 out of a vette from the 80's...............could this possibly cause vibration at highway speeds?
Any suggestions to resolve would be appreciated.
Thread Starter
Intermediate
Joined: Jul 2004
Posts: 33
Likes: 1
Thread Starter
Intermediate
Joined: Jul 2004
Posts: 33
Likes: 1
Drifting
Joined: Aug 2010
Posts: 1,839
Likes: 45
From: nassau co. new york
read this thread on transmission to differential alignment.http://forums.corvetteforum.com/c3-t...aft-angle.html
Thread Starter
Intermediate
Joined: Jul 2004
Posts: 33
Likes: 1
Hey thanks for the link............after reading this I had installed a rear stabilizer bar which it never had and also a new composite spring which tends to increase the height of the rear. It maybe possible the angle of the shaft is now too much. I will check this out once i figure out how to check the angle degree.
