1968 corvette 327 l79
#21
Safety Car
[QUOTE=reel vinyl;1580387745]thanks Paul ......whats smog set up?[/
Paul is referring to the smog pump assembly. I will let Paul will jump in and explain it way better than I ever could.
Paul is referring to the smog pump assembly. I will let Paul will jump in and explain it way better than I ever could.
Last edited by bkvette3; 03-26-2012 at 09:17 PM.
#22
Melting Slicks
Mike Ward and Easy Mike, I just checked my 68 L-79 engine on an engine stand and there is only the small 1/8" npt hole for the oil gauge tube at the back of the block. That earlier block has the huge hole in the back that I am assuming is for the road draft tube and two npt holes.
#23
Team Owner
Member Since: Jun 2000
Location: Southbound
Posts: 38,928
Likes: 0
Received 1,469 Likes
on
1,248 Posts
Cruise-In II Veteran
Mike Ward and Easy Mike, I just checked my 68 L-79 engine on an engine stand and there is only the small 1/8" npt hole for the oil gauge tube at the back of the block. That earlier block has the huge hole in the back that I am assuming is for the road draft tube and two npt holes.