the days coming soon
Help installing fitting the front clip
Thread Starter
Pro
Joined: Dec 2011
Posts: 691
Likes: 1
From: gilboa ny
Help installing fitting the front clip
I got parts from 2 cars with my project car so Im not completly sure I have everything and I know I got doubles of some parts. This is the real hard part about putting a car back together that I didnt dissassemble!
First thing first I'm trying to figure out how the inner fenders attach. I got the AIM but the sections I looked at seem to treat the body as a single piece,am I missing a section?
Any help in figuring out how this goes back is appreciated. I few searches on the forum didnt turn up anything too helpful,if anyone knows there are detailed photos in a particular thread please point me toward it. Thanks!
First thing first I'm trying to figure out how the inner fenders attach. I got the AIM but the sections I looked at seem to treat the body as a single piece,am I missing a section?
Any help in figuring out how this goes back is appreciated. I few searches on the forum didnt turn up anything too helpful,if anyone knows there are detailed photos in a particular thread please point me toward it. Thanks!
Drifting
Joined: Aug 2003
Posts: 1,868
Likes: 13
From: Mascoutah IL
LA--
Check out MaineVettes web page... He goes into pretty good detail...
http://www.corvette-restoration.com/...lacement_1.htm
http://www.corvette-restoration.com/...lacement_2.htm
http://www.corvette-restoration.com/...lacement_3.htm
http://www.corvette-restoration.com/...lacement_4.htm
Rogman
Check out MaineVettes web page... He goes into pretty good detail...
http://www.corvette-restoration.com/...lacement_1.htm
http://www.corvette-restoration.com/...lacement_2.htm
http://www.corvette-restoration.com/...lacement_3.htm
http://www.corvette-restoration.com/...lacement_4.htm
Rogman
Thread Starter
Pro
Joined: Dec 2011
Posts: 691
Likes: 1
From: gilboa ny
Rogman!Thats exactly what I needed to see.Looks like the parts I was wondering WTF are these are exactly what I thought,somehow involved in installing the clip.These parts here
Looks like the right and left reinforcement plate. Going to review the rest of that link now and see if I can ID the other 3 parts,Feel free to chime in if you know though!
Melting Slicks
Joined: May 2005
Posts: 2,486
Likes: 71
From: Elkhart Lake, Wisconsin
Rogman!Thats exactly what I needed to see.Looks like the parts I was wondering WTF are these are exactly what I thought,somehow involved in installing the clip.These parts here
Looks like the right and left reinforcement plate. Going to review the rest of that link now and see if I can ID the other 3 parts,Feel free to chime in if you know though!
http://www.parts123.com/parts123/yb....Z5Z5Z50000050G
Last edited by RobRace10; Apr 8, 2012 at 05:31 PM.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Melting Slicks
Joined: May 2005
Posts: 2,486
Likes: 71
From: Elkhart Lake, Wisconsin
http://www.parts123.com/parts123/yb....Z5Z5Z50000050G
And these, the support the hinges and fasten to the inner fender and the radiator surround. Usually they are already riveted to the inner fender if they were on a car already.
http://www.parts123.com/parts123/yb....Z5Z5Z50000050G
Thread Starter
Pro
Joined: Dec 2011
Posts: 691
Likes: 1
From: gilboa ny
Cool! I just ordered thier catalog looks like it will be more help than the AIM in this part. Ill be looking for those parts tommorow. Took a few days off,was going to be a family vakay. Good thing we didnt go,we are all sick as dogs. Not too sick to dig around in the garage and fit parts though! lol!
That support makes sense,was trying to figure out how that part was supposed to hold up the hood.
This is starting to make sense. knew there had to be more to it!
That support makes sense,was trying to figure out how that part was supposed to hold up the hood.
This is starting to make sense. knew there had to be more to it!
