Ed
Front Spoiler Extention
Former Vendor
Joined: Aug 2006
Posts: 76,656
Likes: 1,852
From: Jeffersonville Indiana 812-288-7103
St. Jude Donor '08-'09-'10-'11-'12-'13-'14-'15
Ed-
This spoiler was only used on cars with L-82, h/d cooling on cars without the optional spoiler package... I have 1 only in stock..
Willcox
http://willcoxcorvette.com/product_i...ducts_id=27459
This spoiler was only used on cars with L-82, h/d cooling on cars without the optional spoiler package... I have 1 only in stock..
Willcox
http://willcoxcorvette.com/product_i...ducts_id=27459
Last edited by Willcox Corvette; Aug 7, 2012 at 03:14 PM.
Le Mans Master
Joined: Oct 2005
Posts: 6,247
Likes: 471
From: Glen Allen, VA
Willcox, any chance of getting more of those since you said you only have 1 in stock? I have a 79 L-82 A/C car. Would that necessitate the HD cooling pkg? I do have the auxilary electric fan. Mine doesn't have that rubber extension, and it runs hotter than I'd like on the interstate.
Former Vendor
Joined: Aug 2006
Posts: 76,656
Likes: 1,852
From: Jeffersonville Indiana 812-288-7103
St. Jude Donor '08-'09-'10-'11-'12-'13-'14-'15
If you have HD cooling (electric fan and a trap door fan shround), L-82, with air.. and no urethane spoiler then it is my belief that you had this on your car and someone replaced it.
I have one here for a pattern and I will send it out for pricing.. Since this is a 1 year only item I'm not sure he demand would justify making this but we will see.
I"m sorry, I don't have any additional ones that I can sell.
Willcox
I have one here for a pattern and I will send it out for pricing.. Since this is a 1 year only item I'm not sure he demand would justify making this but we will see.
I"m sorry, I don't have any additional ones that I can sell.
Willcox
Le Mans Master
Joined: Oct 2005
Posts: 6,247
Likes: 471
From: Glen Allen, VA
Yup, I have the trap door shroud and aux fan, and I too believe the extension was removed some time in the past. Wish I were a little faster seeing this post, that extension would be on it's way to VA instead! Thank you so much for looking into this! Does anyone have a picture of one installed? I've never actually seen one.
Former Vendor
Joined: Aug 2006
Posts: 76,656
Likes: 1,852
From: Jeffersonville Indiana 812-288-7103
St. Jude Donor '08-'09-'10-'11-'12-'13-'14-'15
The extension actually riveted to the front of the ABS spoiler. It was done so with a rivet that had about a 1/2" head. It was a standard pop rivet... Funny.. my 79 had one of these and after a few years I thought I'd better order in me a replacement just in case... Well I got rid of the car years and years ago and never installed it..
When installed it doesn't look like a factory installed item either..
I'll look and see if I have a picture of the car, but I do have a picture from the AIM.. I'll see if I can dig that up tonight and post it on the site.
Willcox
When installed it doesn't look like a factory installed item either..
I'll look and see if I have a picture of the car, but I do have a picture from the AIM.. I'll see if I can dig that up tonight and post it on the site.
Willcox
Melting Slicks
Joined: Sep 2004
Posts: 3,225
Likes: 667
From: Northeast
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Le Mans Master
Joined: Oct 2005
Posts: 6,247
Likes: 471
From: Glen Allen, VA
Thanks Karol, I forgot about that thread, and I even commented in it. CRS is catching up to me! Willcox, I have an AIM, I'll go look it up there too. Also, Willcox, I wouldn't want you to go through any trouble solely on my part. I can always look for one at Carlisle.
Former Vendor
Joined: Aug 2006
Posts: 76,656
Likes: 1,852
From: Jeffersonville Indiana 812-288-7103
St. Jude Donor '08-'09-'10-'11-'12-'13-'14-'15
Boy.. what a mess I've gotten myself into. Ed79 called and purchased the only extension we had to sell and Norm did not remove it from the web site. I've had four orders come in on this part number and all have been refunded.
I do not have anymore to sell and I wish I did.
I shouldl have some pricing on a reproduction soon I hope.
Ernie
I do not have anymore to sell and I wish I did.
I shouldl have some pricing on a reproduction soon I hope.
Ernie
Former Vendor
Joined: Aug 2006
Posts: 76,656
Likes: 1,852
From: Jeffersonville Indiana 812-288-7103
St. Jude Donor '08-'09-'10-'11-'12-'13-'14-'15
Good Deal Bob... But guess what else happened since my last post...
I ran up to the shop we were having make them to see where they were at on it... They should have me pricing tomorrow.. Possibly product by Friday... Since it would be a one year item part the run won't be as large had it fit other years but hopefully the run will be large enough.
E
I ran up to the shop we were having make them to see where they were at on it... They should have me pricing tomorrow.. Possibly product by Friday... Since it would be a one year item part the run won't be as large had it fit other years but hopefully the run will be large enough.
E
Former Vendor
Joined: Aug 2006
Posts: 76,656
Likes: 1,852
From: Jeffersonville Indiana 812-288-7103
St. Jude Donor '08-'09-'10-'11-'12-'13-'14-'15
Not a problem Bob.. At least it opened my eyes up to the fact that we could get them. It also opened a door to a local manufacturer that can produce other things for me. 
I'm all geared up now..
I'm all geared up now..
Racer
Joined: Oct 2010
Posts: 259
Likes: 3
From: Plano TX
Spoiler
Interesting.
In spring of 1978 the original motor in my BBC '73 was tossed and replaced with a new LS6 crate assembly and 188 heads (all date coded late '77, and it's a 959 block by the way). Here's part of the original invoice:
And a recent picture or the motor:
At that time, the radiator was pulled and fitted with an additional core. Also, we added the rubber spoiler to the front:
It's off the car right now because in 2005 the car got a repaint, and I've never gotten around to putting it back on; probably because it runs at an indicated 170 regardless.
Can't explain why it was available in '78, but that's the way it was.
In spring of 1978 the original motor in my BBC '73 was tossed and replaced with a new LS6 crate assembly and 188 heads (all date coded late '77, and it's a 959 block by the way). Here's part of the original invoice:
And a recent picture or the motor:
At that time, the radiator was pulled and fitted with an additional core. Also, we added the rubber spoiler to the front:
It's off the car right now because in 2005 the car got a repaint, and I've never gotten around to putting it back on; probably because it runs at an indicated 170 regardless.
Can't explain why it was available in '78, but that's the way it was.
Former Vendor
Joined: Aug 2006
Posts: 76,656
Likes: 1,852
From: Jeffersonville Indiana 812-288-7103
St. Jude Donor '08-'09-'10-'11-'12-'13-'14-'15
I can make the spoilers... although I'm not happy with the cost to do it, I have to understand that it is a limited very small run.
So if anyone on this thread is interested in one please post or send me an email..
We will be contacting those that ordered the single spoiler the other day. and I will be creating a new link on the site should one wish to order this item.
The price will have to be the same due to the limited fit of this part, 50.00.
Willcox
So if anyone on this thread is interested in one please post or send me an email..
We will be contacting those that ordered the single spoiler the other day. and I will be creating a new link on the site should one wish to order this item.
The price will have to be the same due to the limited fit of this part, 50.00.
Willcox