Rolling Chassis Pictures please
Instructor
Joined: Dec 2013
Posts: 158
Likes: 0
From: Maui Hawaii
Did anyone come across someone who purchased a Collier Technologies stainless steel frame? Or have pictures of the build with this frame?
http://www.colliertechnologies.com/products.html
I'm thinking of buying one for my '82 as the stock one is rotted out in several places due to the salt environment around these parts.
http://www.colliertechnologies.com/products.html
I'm thinking of buying one for my '82 as the stock one is rotted out in several places due to the salt environment around these parts.
Drifting
Joined: May 2005
Posts: 1,968
Likes: 44
From: East TN
Drifting
Joined: May 2005
Posts: 1,968
Likes: 44
From: East TN
Did anyone come across someone who purchased a Collier Technologies stainless steel frame? Or have pictures of the build with this frame?
http://www.colliertechnologies.com/products.html
I'm thinking of buying one for my '82 as the stock one is rotted out in several places due to the salt environment around these parts.
http://www.colliertechnologies.com/products.html
I'm thinking of buying one for my '82 as the stock one is rotted out in several places due to the salt environment around these parts.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Senior Member
Joined: Jan 2008
Posts: 12,146
Likes: 2,038
From: Easton, PA
St. Jude Donor '10
Recently Purchased
ZZ4 Crate Engine with Tremec TKO600 with Hurst Sidewinder shift, VBP Rack Attack on Front and Touring Suspension in rear with 3.73 rear end, Bilstein shocks, lots of upgrades. Painted with POR15 black.
Instructor
Joined: Dec 2013
Posts: 158
Likes: 0
From: Maui Hawaii
Probably not for the LSX but for the SBC & BBC only. All Hedman Vette headers for the factory side exhaust (Hedman calls them "Side Mount") carries part numbers with prefix 682xx.
Hedman's product web page doesn't show any 682xx part numbers but Summit Racing listing here for the Hedman Vette Side Mount Headers: http://tinyurl.com/mwd89lb
Hedman's product web page doesn't show any 682xx part numbers but Summit Racing listing here for the Hedman Vette Side Mount Headers: http://tinyurl.com/mwd89lb
Cruising
Joined: Aug 2013
Posts: 11
Likes: 0
Cruising
Joined: Aug 2013
Posts: 11
Likes: 0
frame was full of pit marks after sandblasting, so I skim coated the entire frame withttp://forums.corvetteforum.com/attachment.php?attachmentid=47752http://forums.corvetteforum.com/attachment.php?attachmentid=47752506&stc =1&d=1386950968505&stc=1&d=1386950891h bondo
Cruising
Joined: Aug 2013
Posts: 11
Likes: 0
its a lot of work , but came out very well. I used an imron typ paint on the frame ,very durable and single stage,(don't want to polish the entire frame)http://forums.corvetteforum.com/atta...1&d=1386951323
Cruising
Joined: Aug 2013
Posts: 11
Likes: 0
a lot of sandinhttp://forums.corvetteforum.com/attachment.php?attachmentid=47http://forums.corvetteforum.com/attachment.php?attachmentid=47752509&stc =1&d=1386952654752508&stc=1&d=1386952629 g on this cover !!!!!!! A LOT OF SANDING THIS COVER
Cruising
Joined: Aug 2013
Posts: 11
Likes: 0
Senior Member
Joined: Jan 2008
Posts: 12,146
Likes: 2,038
From: Easton, PA
St. Jude Donor '10
its a lot of work , but came out very well. I used an imron typ paint on the frame ,very durable and single stage,(don't want to polish the entire frame)http://forums.corvetteforum.com/atta...1&d=1386951323
Love it, very nice.
David
Instructor
Joined: Dec 2013
Posts: 158
Likes: 0
From: Maui Hawaii
Probably not for the LSX but for the SBC & BBC only. All Hedman Vette headers for the factory side exhaust (Hedman calls them "Side Mount") carries part numbers with prefix 682xx.
Hedman's product web page doesn't show any 682xx part numbers but Summit Racing listing here for the Hedman Vette Side Mount Headers: http://tinyurl.com/mwd89lb
Hedman's product web page doesn't show any 682xx part numbers but Summit Racing listing here for the Hedman Vette Side Mount Headers: http://tinyurl.com/mwd89lb
Not sure if they fit the LSX heads or if the manufacturer might also make them for the LSX. Might be worth an email to them.