78 T Top question
Thread Starter
Racer
Joined: Jul 2013
Posts: 423
Likes: 6
78 T Top question
I just noticed that there is a small **** on each of my T tops.. They both seem to be loose and just hanging there.. Don't seem to do anything but I'm sure they are there for a reason.. Can someone tell me what they are for ? Thanks in advance..
Race Director
Joined: Oct 2000
Posts: 12,613
Likes: 3,094
From: Shamong, NJ
Do you have factory glass tops? If so, I assume your referring to the small black cap (similar to a valve stem cap), on the underside of the outer rear corners of the top. They are not *****, but instead just trim pieces. There are studs under them, that were used to assemble the tops.
If you remove the caps, DON'T play with the nuts under them, as you may crack your glass top!
If you remove the caps, DON'T play with the nuts under them, as you may crack your glass top!
Thread Starter
Racer
Joined: Jul 2013
Posts: 423
Likes: 6
Do you have factory glass tops? If so, I assume your referring to the small black cap (similar to a valve stem cap), on the underside of the outer rear corners of the top. They are not *****, but instead just trim pieces. There are studs under them, that were used to assemble the tops.
If you remove the caps, DON'T play with the nuts under them, as you may crack your glass top!
If you remove the caps, DON'T play with the nuts under them, as you may crack your glass top!
