71 interior question

Reply Subscribe

Thread Tools

Search this Thread

Nov 12, 2014 | 12:08 AM

RizVet

Thread Starter

Racer

Joined: Dec 2010

Posts: 316

Likes: 29

From: Long Island, NY

71 interior question

I see some 71s with a RH radio side panel extension, some without the extension piece. What's correct? How does the extension attach?

Nov 12, 2014 | 07:44 AM

Easy Mike

Team Owner

Joined: Jun 2000

Posts: 38,923

Likes: 1,481

From: Southbound

Cruise-In II Veteran

I am wondering whether you mean coupe or convertible and not radio. It is possible convertibles have a trim piece attached to the RH console trim which covers part of the cowl bracing.

Nov 12, 2014 | 07:52 AM

RizVet

Thread Starter

Racer

Joined: Dec 2010

Posts: 316

Likes: 29

From: Long Island, NY

I have a convertible with AC car. Again I see most cars with just the RH mostly square trim panel and a few cars with the extension piece as well. Alan must know 😄

Nov 12, 2014 | 08:34 AM

Alan 71

Team Owner

Joined: Sep 2006

Posts: 31,170

Likes: 4,248

From: Westminster Maryland

Hi R71,
Thanks for the vote of confidence.
The 71 AIM shows the same part number for the small filler panel for both coupes and convertibles.
It shows a small extension piece, that screws to the filler panel, as part of the a/c option. Part Number 1954504, Convertible only.
That DOESN"T mean the production line may or may not have been doing something different.
Here's a coupe, no a/c.
Regards,
Alan

Last edited by Alan 71; Nov 12, 2014 at 08:41 AM.

Nov 12, 2014 | 08:37 AM

RizVet

Thread Starter

Racer

Joined: Dec 2010

Posts: 316

Likes: 29

From: Long Island, NY

I praeume the filler panel extension is a separate piece as shown in most parts catalogues. I'm wondering how it attaches. Most 73s have it and it seems to be one piece. Any knowledge on how it attaches?

Nov 12, 2014 | 09:11 AM

69FASTFUN

Drifting

Joined: Aug 2006

Posts: 1,727

Likes: 193

From: Scottsdale Arizona

These are off of my 72 convertible. The extension piece that you aske about is held on by a couple screws.

Nov 12, 2014 | 10:31 AM

Easy Mike

Team Owner

Joined: Jun 2000

Posts: 38,923

Likes: 1,481

From: Southbound

Cruise-In II Veteran

Quote:

Originally Posted by 69FASTFUN

...

Yep. That widget.

Nov 12, 2014 | 02:55 PM

Alan 71

Team Owner

Joined: Sep 2006

Posts: 31,170

Likes: 4,248

From: Westminster Maryland

Hi r,
There are 2 raised 'pads' on the back side of the filler that are already drilled to accept the 2 screws that mount the extension.
Regards,
Alan