Frame swap
Thread Starter
Racer
Joined: Aug 2013
Posts: 281
Likes: 22
From: Branford Conn.
Frame swap
I am doing a body lift to change the frame on my 68 roadster and I am having a hard time with all the bolts, not just the body mounts. I haven't been able to remove any of the bolts holding the rear bumper on, Is this normal?
Race Director
Joined: Mar 2003
Posts: 11,608
Likes: 778
From: Eustis ( Area 51 Bat Cave ) Fl
In some cases heat and or spray bolt breaker stuff helps...as does cussing.
Advanced
Joined: Apr 2015
Posts: 88
Likes: 0
From: Hialeah Florida
Luck
I'm replacing the rear bump stops, sprayed WD40 on both, the right I had to chisel it off the left using an open end wrench turned without much effort, they both look about the same and I'm figuring by their rough appearance they are original. Good luck with the bolts
