Need help on jacking points
Team Owner
Joined: Sep 2006
Posts: 31,289
Likes: 4,380
From: Westminster Maryland
Hi r024,
Here's the info from the 71 Owners Manual.
This requires moving from side to side as you set the jack stands.
People who don't want to go through that bother jack from the front center of the large crossmember (that's why so many are dented) and from the rear under the spring mount bracket.
Where you put the jack stands depends somewhat on just where you'll be working.
BE CAREFUL under there!
Regards,
Alan
I like this position… to the rear of the sway bar mounts and at the try-angular gusset just before the frame kick-up.
Here's the info from the 71 Owners Manual.
This requires moving from side to side as you set the jack stands.
People who don't want to go through that bother jack from the front center of the large crossmember (that's why so many are dented) and from the rear under the spring mount bracket.
Where you put the jack stands depends somewhat on just where you'll be working.
BE CAREFUL under there!
Regards,
Alan
I like this position… to the rear of the sway bar mounts and at the try-angular gusset just before the frame kick-up.
Thread Starter
Intermediate
Joined: Sep 2009
Posts: 38
Likes: 1
From: Roanoke VA
Hi r024,
Here's the info from the 71 Owners Manual.
This requires moving from side to side as you set the jack stands.
People who don't want to go through that bother jack from the front center of the large crossmember (that's why so many are dented) and from the rear under the spring mount bracket.
Where you put the jack stands depends somewhat on just where you'll be working.
BE CAREFUL under there!
Regards,
Alan
I like this position… to the rear of the sway bar mounts and at the try-angular gusset just before the frame kick-up.
Here's the info from the 71 Owners Manual.
This requires moving from side to side as you set the jack stands.
People who don't want to go through that bother jack from the front center of the large crossmember (that's why so many are dented) and from the rear under the spring mount bracket.
Where you put the jack stands depends somewhat on just where you'll be working.
BE CAREFUL under there!
Regards,
Alan
I like this position… to the rear of the sway bar mounts and at the try-angular gusset just before the frame kick-up.
