When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I received my brake lines and halo today.
Thank you both very much.
Although I did not have anything worthy to pay it forward this as years in the past, I will not forget to spread the spirit throughout the year as items become available.
Merry Christmas,
Marshal
I've got a pair of seat adjustment ***** that I'd be happy to send to someone. Might take me a little bit of time as it's getting busier around here. They're a little scuffed but I think we would clean up ok.
Also.. just a note.. You must make sure to get all the old glue off the old switch before you install.. This decal is like all paper and anything left under it will show if you install it over top.
Ernie.
Got it today Ernie - Thanks again! and Merry Christmas!
I would just like to say thank you here to Allc34me for shipping me 4 71 tail lights no charge.
I did a search for 71 tail lights in the parts section and I saw he had 4. I PM'd him to see if he still had them and he said yes what's your address, I asked how much he said Merry Christmas. By the way the tail lights are mint.
Again Thank You David and check your mail I hope it gets there by Christmas
I would just like to say thank you here to Allc34me for shipping me 4 71 tail lights no charge.
I did a search for 71 tail lights in the parts section and I saw he had 4. I PM'd him to see if he still had them and he said yes what's your address, I asked how much he said Merry Christmas. By the way the tail lights are mint.
Again Thank You David and check your mail I hope it gets there by Christmas
My pleasure and glad you like the tail lights. Use them in good health.
Best regards and Merry Christmas.
David
I am offering a GM Rochester 2 barrel carb that in and of itself may not be of great value, however, the reason my Dad got it (at least I am fairly sure) is because in his desire to make the car look original, is because of the anti-knock device that is on the carb. As this is not the direction I am going with project now that it is mine, I am more than glad to offer this to someone who may be able to use it. So if you want it, it is all yours and I will pay the postage. Coming a little late in the season, but I hope this can find a good loving home. Thanks to all who have helped me along with my project, and Merry Christmas to all. Andy
Last edited by Giddy-up Go; Dec 23, 2016 at 12:07 AM.
Reason: Add pics
I gave away my 81 CCM controlled Rochester Q-jet last year to Joe79vette and now I am looking to give away the Edelbrock manifold and carburetor that replaced it, however I need to get a Rochester Q-jet before I can remove and ship it. If you have a non-computer Q-jet and want to trade that would be the preferred way to do this, otherwise you might have to wait until I can get one.
It's a non-egr Perfomer EPS manifold and a 1406 carb, see pictures.
Merry Christmas, Happy Holidays, hope someone can use this..
I gave away my 81 CCM controlled Rochester Q-jet last year to Joe79vette and now I am looking to give away the Edelbrock manifold and carburetor that replaced it, however I need to get a Rochester Q-jet before I can remove and ship it. If you have a non-computer Q-jet and want to trade that would be the preferred way to do this, otherwise you might have to wait until I can get one.
It's a non-egr Perfomer EPS manifold and a 1406 carb, see pictures.
Merry Christmas, Happy Holidays, hope someone can use this..
I have a Q-Jet I removed from a 1975 recently. It is in great condition. Let me know if this is something you might want to trade for please.
David Howard
AllC34Me
I have a Q-Jet I removed from a 1975 recently. It is in great condition. Let me know if this is something you might want to trade for please.
David Howard
AllC34Me
works for me...I have to pull it off the motor and being the weekend that it is, I may not get to it until next week, but it yours if you want to swap..
Ok much thanks to All!
